How to install Ubuntu (Linux) and WINDOW7 dual system, as well as install successful after startup Item no win system solution.

Source: Internet
Author: User

Tools Required:

  • Windows 7 64-bit (author notebook comes with system)

  • Ubuntu 13.04 32-bit (download the latest version of the website)

  • UltraISO the latest version (find your own channel to download, to burn the image file to the U disk)

  • An empty USB flash drive (if you have files, please backup first)

    Steps:

    This method is installed with a USB stick, of course, there are many ways to introduce a relatively simple one of it;

    Remember, do not use the DiskPart command to set the U-disk as the boot disk, and do not mix with Windows installation methods.

    Here is the write USB drive:

      • Please first allocate a disk space for the installation of ubuntu13.04, the author divided the 100G.

        Win7 from the tool with the sub-disk, only need to compress the steps, do not need to continue the partition format and other operations. This process please "Baidu a bit"

        I forgot at the time, is installed in Ubuntu 13.04 after the disk allocation status, we can ignore, do not look, so as not to cause misleading.

      • The following installation process is divided into two parts: the steps to write the image file ISO to the USB flash drive and the ubuntu13.04 installation Steps

    1. Download and install the UltraISO software, as we are simply writing the ubuntu13.04 image file to the U-disk, so there is no need to install the virtual ISO drive (isodriver) below.

      Installation Finally, you may need a registration code to activate the software, please resolve the issue on their own.

    2. Run the UltraISO software, find the location of the ubuntu13.04 image file in the "local directory" , and when found on the right, double-click the image file

    3. After completing the previous step, select "Start"-"Write to hard disk image ..." above

    4. In the pop-up window, as set,

      Burn check: Tick the Checkmark

      Write mode: usb-zip+

      Quick start: Write to new hard drive master boot record (MBR)-usb-zip+

      When the settings are complete, click Write

      Such as:

    5. After you click Write in the previous step, you see the following prompt, click Yes

      Note: After that, you will continue to see two warnings, please select "Yes" and not specifically here.

    6. It will take a few minutes to start writing the image file, depending on the performance of your USB stick.

      When the burn is complete, the software will be prompted with Chinese characters.

      Here, the work of writing the ubuntu13.04 to the USB stick is over.

      Installation steps:

      1. Restart the computer, starting from the USB stick, the author of the Notebook is Lenovo series, power-on press F12 can choose to start which device, if you are different from the author, do not know how to start the U disk, please first Baidu a bit related content.

        It was shot on the spot:

      2. 2

        After a moment, we will enter the installation interface of ububtu13.04, where we have selected "Chinese (Simplified)" and then click Install:

        It was shot on the spot:

      3. When it appears, select it as needed, and then click Continue.

        Next you will be asked if you want to connect to the network, we select "I do not want to connect WiFi network Now", and then click "Continue", because of the space problem, not upload it here.

      4. We want to manually break the disc, so when it appears, select "Other options"

      5. Find the letter labeled "Free", the drive is the 100G space we used to install Ubuntu, do not touch other disk characters, careful to make the time Win7 can not be used, and even the brand's own hidden partition will be destroyed.

        Then, click on the "+" below

      6. Next, we have to do four partitions, each time from the "idle" part of the area, the internet also said two times the partition can be, but beginners, according to 4 times go on the line, later want to explore, it is later.

        First time partition:

        The previous step point "+", make the following settings:

        mount point: "/"

        Size: 22000MB

        Type of new partition: Primary partition

        Location of new partition: space start position

        For: EXT4 log file system

        First Partition complete

        As shown:

      7. Secondary partition:

        "Idle" place, continue to point "+", the following settings,

        Mount point: (not set)

        Size: 2048MB (online is considered to be twice times the physical memory, in fact, I think 1G is enough, at most 2G)

        Type of new partition: Logical partition

        Location of new partition: space start position

        For: Swap space

        The second partition is complete.

        As shown:

      8. Third Partition:

        "Idle" place, continue to point "+", the following settings,

        mount point:/boot (online some say that you do not need to set this, but dual-system boot needs, not to understand these)

        Size: 200MB (I temporarily set to 200MB)

        Type of new partition: Logical partition

        Location of new partition: space start position

        For: EXT4 log file system

        The third partition is complete.

        As shown:

      9. Fourth sub-partition:

        "Idle" place, continue to point "+", the following settings,

        Mount point:/Home

        Size: (All remaining space, left to show how much, just how much)

        Type of new partition: Logical partition

        Location of new partition: space start position

        For: EXT4 log file system

        Fourth partition completed

        As shown:

      10. After the partition is set up, there is also a "Install Boot boot device", the default is as shown, is also the user said SDA, if you choose Default, it is Ubuntu boot Windows7, when uninstalling Ubuntu, it may be troublesome, If you want to boot Ubuntu with Windows7, choose the drive letter of your/boot, and then install the boot class software under Windows to start Ubuntu, which can be more complicated. This step please choose carefully, the author chooses the default options, what problems will arise later.

        Then click "Install Now",

      11. After the steps are nothing complicated, press the prompt to click "Continue" on the line, there is a choice of keyboard layout, the default is "Chinese", we recommend that you choose "English (United States)", such as:

      12. One more step is to set up some personal information, please follow the prompts, and then click "Continue"

        And then..... Wait a moment and the installation is complete.

        At this point, this experience "Win7+ubuntu 13.04 Dual System installation Method" to this end

      Restart the computer after installation may find that the Win7 system is not visible, here the author's approach is this:

      Enter the Ubuntu system to open the terminal, enter the sudo update-grub carriage return if you see Win7 again, there will be an option to restart again.

How to install Ubuntu (Linux) and WINDOW7 dual systems, as well as a successful boot entry without win system solution.

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.