How to use the Green prairie WiFi

First, open the software

Download the software first, then unzip it to the desktop, open the software, WiFi name and password can be modified, point [open WiFi], notebook computer to launch a WiFi, take the phone to connect it. There is nothing more simple than this green.

Second, one key restart

If your phone is not connected to WiFi, it may be a shared error, try [restart WiFi] and it will force the initialization of WiFi.

　　Iii. Black and white list

Software offers two types of WiFi firewall mode, blacklist mode and whitelist mode.

Blacklist mode: Here you can see the connection User IP address, user hardware identification (MAC), device name. Among them, the user's IP address will change, each access may be different, usually 192.168 start, the user's hardware identity is fixed, equivalent to his identity card; device name can be modified to facilitate their own memory who is who. If you don't want someone to connect to WiFi, pull him into the blacklist.

Whitelist mode: The use of wireless router Mac binding function of child shoes should know, can be pre-set to allow the specified device access, other devices are not connected to the network. The green Prairie WiFi white list pattern is such an effect.

Add whitelist to select a user from the blacklist mode to copy to the white list, switch back to the white list mode has:

　Iv. setting up of the center

Computer networking mode without special circumstances, please do not choose their own, software intelligent judgment. If you find the wrong, you can choose, and check the card to remember the next time you start to remember this.

Startup software This feature is carefully selected, this is to do not use the dial-up computer, or the launch of the WiFi connection also has no network, the boot need to dial please do not tick this option.