Tools/raw Materials
Computer
Method/Step
Method One: New model UEFI startup settings
To Lenovo as an example, the boot log interface, there is the option to enter the BIOS, the following figure F2 key, in this interface press F2 key, you can enter the BIOS.
into the BIOS, but mostly for setting U disk or CD-ROM, now many of the new computer BIOS is UEFI type, this type of computer for the setting up boot device provides a very good way, it does not need to enter the BIOS, but directly select the startup, after the boot, immediately press F12, or fn+ The F12 key enters the Quick Launch options interface.
Enter the startup item selection interface, the following figure, there are hard disk, CD-ROM, u disk startup items, select the name of the device, press ENTER, you can use the device to start the computer, if you want to know the name of the boot device, you can go to the Device Manager to know.
First, if there are st,wds and other characters, this class is the hard disk boot option.
Second, if there are cd/dvd-rom such characters, the CD Boot device.
Third, if the device in front of the USB-HDD or flash disk characters, it must be a U disk boot device.
Method Two: View the motherboard manual
After purchasing a computer or motherboard, there will be a manual that will explain how to enter the BIOS method.
Find the specification directory, in the BIOS setup this item, different motherboard or computer, the instructions will not be the same, according to their own instructions to find.
According to the directory to find the BIOS setup this chapter, to see the key to enter the BIOS, the general will be displayed in English, the following figure "Press Del to enter Setup", this sentence in English means "pressing the DEL key to determine the BIOS settings."
Tip: Enter the BIOS, be sure to boot immediately press into the BIOS key, keep clicking until the BIOS interface is displayed.
Method Three: Pause key with keyboard to view enter BIOS key
If it's an assembler, or an old machine, the instructions have been lost, how to do, and the boot board log display interface time is very short, a flash over, simply can not see which key to enter the BIOS, the following teach you a method, on the power-on, immediately press the "Pause break" key, this is the system suspend key,
When you pause to the motherboard log interface, you need to see the BIOS settings key, generally in the lower left corner or upper right corner, if the pause button pressed late, you can come several times.
If it is Win8 above system, in order to quickly start the computer, usually shut down this motherboard log interface, can be in the Power option of the panel, cancel the Quick start, will display this interface.
Keyboard shortcuts for various computers entering the BIOS