How to implement USB debugging for Huawei c8650 and network debugging

[Original post: Success /]

It takes some time to debug the USB. Not all. This refers to the Mac OS platform. On Windows, you can skip this step.

Why can't this Mac OS platform work? The main reason is that the USB mode of Huawei has a dual-mode optical disc and USB, that is, you plug in the mobile phone to the USB port under windows, and the system will automatically load a CD image, which of the following is the broadband connection program of Tianyi? This is the optical disc mode, and the dual mode is added with the USB function.

This mode is hard to say, it is useless for me, especially on Mac OS. This mode is simply the SB mode, and my Mac does not recognize the CD mode, all are windows executable programs. Naturally, ADB could not recognize the Android device, and thought it was too junk. I also went to the Forum to ask.

That is, when I visited the forum, I accidentally solved this problem. At that time, I wanted to see how other people solved the problem of c8650gps locating failure. I found an article saying that I wanted to turn off the mobile phone's fast location function based on the CDMA network. So according to the article, enter the project mode.

Dial on your mobile phone: * #2846579 #*#*

After entering the project mode, select projectmenu, and then "3. set "in the background, and then" 4. USB port configuration, you will see a long list, as long as you select "Google mode. Then exit the engineering mode and restart the machine. Try again to connect to the Mac, and a prompt will appear on the mobile phone that has been connected to USB for debugging. You can also view the c8650 device by using "ADB devices" in the system.

Try writing a program. Everything works.

 

[Note]

I brushed a ROM for c8650 last month, which is thick V 9. The Rom is optimized from cm7, so it does not support entering the Huawei engineering mode. Big head, which can help solve this problem please mail: liting6680@163.com, very grateful.

 

[Note]

The Huawei engineering model failed to be started. However, we found that network debugging could be used.

Start the android terminal simulator and enter the following command:

 

[Plain]View plaincopy

1. # Stop adbd
2. # Set service. ADB. tcp. port 5555
3. # Start adbd