How to log on to a vro (including TP-Link, NetCore, Tenda, and Mercury)

Quick lookup of vro URLs

I. Vro guard 360PC: Android: Apple

360 vro assistants can identify the vast majority of vro brands on the market. With vro assistants of 360, you can directly perform operations such as broadband account dialing and wireless password modification, it can also prevent others from bypassing the Internet.

II. General website

192.168.1.1 and 192.168.0.1 are the general background logon URLs of most vro brands on the market. Most vro models can be opened using these two URLs. In particular, the new TP-Link router URL is "tplogin.cn ".

III. Router backplane

The backend management page address is usually displayed on the vro tab. As shown in the preceding figure, the TP-Link vro URL is "tplogin.cn ".

Tip: If the router URL cannot be opened, please refer to 192.168.1.253 cannot be opened. What should I do?

1. Check the line connection

Check whether the computer's network cable is connected to the correct port (1, 2, 3, 4 any LAN port), ensure that the computer network cable interface and the corresponding router interface indicators (green) normal.

Network cable connection diagram

Note: Some router indicators are marked with 1, 2, 3, and 4 on the front panel.

2. Confirm that the computer automatically obtains the IP address

Set the computer's wired network card (local connection) to automatically obtain the IP address, click the operating system you are using to view the setting steps.

3. Confirm that the logon method is correct.

Vro Management backend supports domain name logon and management IP address logon:

(1) domain name login

A. The "management page: tplogin.cn" is displayed on the tin mark at the bottom of the vro.

B. Open the browser, enter tplogin.cn, and press Enter. The logon dialog box is displayed.

C. The logon page is displayed. Enter your account and password to log on.

(2) log on with an IP address

A. First, check the default gateway address automatically obtained by the computer. This address is the management IP address of the router.

B. For example, if the Gateway automatically obtained by the computer is 192.168.1.253, the IP address is the management IP address of the router. Open ie, enter 192.168.1.253 in the address bar, and press enter.

4. Check the browser settings

Check the browser settings as follows:

Disable dial-up connections: open ie, Click Tools> Internet Options, and select connection> Never dial-up connections.

Disable network proxy: Click Tools> Internet Options, select connection> LAN settings, make sure the three options are not checked, click OK, return to the previous Internet Options dialog box, and click OK. As shown in the following figure:

Turn off the offline status: the normal web page browsing will be affected in the offline status. Click "browser file"> "offline" to make sure that the check box is removed before going offline.

After setting, log on to the vro management page.

5. Change the browser or computer

Change the browser (using Firefox, Firefox, Google/Chrome, or other browsers) or use another computer to try to log on to the management interface.

6. Reset the vro

When the vro is powered on, use a tip object such as a paper clip, press and hold the reset key on the rear panel of the vro for 5-8 seconds, and the front panel indicator will flash three times until it is always on, indicating that the vro is successfully reset.