How to make a pure USB boot disk

Bo Master before making USB drive disk using the software: old peaches U disk start-up disk making tools
At first it was very convenient and easy to use.
But then found the problem, this thing made the system U disk Boot Disk is not clean. Not clean. Not clean.

At first, not much attention, every time with the old Peaches is not pure version of the original system, will inexplicably appear the following problems:
1. Tampering with Web pages
2.IE Browser's Favorites bar a bunch of inexplicable websites
3. Force a bunch of messy software, software on the software bar, can unload all uninstalled, but that is what Kay defender antivirus software, really disgusting. Uninstall Super trouble.
4. There are some other questions I will not list, in a word: not clean.

At first I thought it was because I re-installed is not pure version of the original system (that is, the official website), and then I went to download the original system, and then again with the old peaches production of u disk Boot disk reload system, found or not clean, and my classmates with the WinPE Toolbox made of the boot disk reload system, It was really clean. The desktop is a recycle Bin. No other messy software is forced to install. IE browser also does not have the inexplicable website.

Summary: Whether you are not a pure version of the system. As long as you use the old Peaches U disk production Tools made of u disk Startup Disk will appear above problems.

so many, the next is the focus of this article
Next I'll organize the tutorial: How to make a pure USB boot disk

1. Go to download **WINPE Toolbox **u Disk Starter Maker Tool
Download Address: http://www.wepe.com.cn/download.html

2. After downloading, start making USB drive boot disk
2.1 Opening the Software

2.2 Enter the main interface:

2.3 Choose to install PE to USB drive
Installation method use recommended settings to write to the USB flash drive: Select the disk you want to make the system reload USB drive disk format to: exFAT and usb-zip u disk label: is the U disk name (optional)

Here to explain the difference between FAT32 NTFS exFAT (content from Baidu Encyclopedia)
ExFAT

FAT32

NTFS

From the user's summary:
1.fat32 A record is generated when there is an error in the partition. Then remember that there was a mistake. There will be no more when you save something again. However, because of technical problems FAT32 does not support files larger than 4GB for single files
2.NTFS Although you can store a single file larger than 4GB but there is no logging function, if the partition has errors and then the new data is stored in the error zone. Imagined. Wait, just the file corruption is lost.
The above-mentioned error zones are only soft errors and can be repaired.
2.exFAT is equivalent to combining the above two advantages. That is, you can store a single file above 4GB (and that theoretical value is quite large), but also log errors ...

Then the difference between USB HDD and USB ZIP
1.ZIP mode refers to the USB flash drive into a ZIP driver mode, the drive after the start of the disk letter is mostly a:
2.HDD mode refers to the simulation of the disk drive mode; Special NOTE: If HDD mode is selected, then the drive letter of the startup USB drive is C:, when the boot partition is operated, it is prone to many problems, such as: When installing the system, the installer will write the boot file to the USB flash drive instead of the boot partition of your hard drive. Cause system installation to fail. So please try to select the zip mode first.
To boot from the USB stick, you need to press the DEL key to enter the BIOS in the first boot device select USB-HDD or Usb-zip, of course, some motherboards do not need to enter the BIOS settings, boot directly press F12 into boot menu can choose

When the Z ' Z is made into the system startup disk, it will format the USB flash drive, so the important data in the USB flash drive should be saved to other locations, after the production is finished, the system can still be used as a normal U disk to install data.

Here's how to make a pure U disk Startup Disk is over.

Subsequent updates will update how the system is re-installed

Attached: (Information from the WinPE Toolbox)
Second, from a U disk, mobile hard disk, CD-ROM boot:
These three start-up methods are a way to boot from the mobile media. The method is to have the BIOS boot from the mobile media at boot time. This can be done in two ways:
1, into the BIOS settings, so that the first computer to boot as a mobile media.
2. Press the startup shortcut key when booting, select the mobile media that need to start.
The author recommends the second way, the advantage of this way is not to let the computer every time to try to move the media, so when the use of PE, enter the system faster. We just need to start from the mobile media every time we use PE.

The following is a list of each brand of the machine boot when the corresponding Startup shortcut button:
Notebook PC:
Lenovo F12
Thinkpad F12
Acer F12
Asus ESC
HP F9
Dell F12
Shenzhou F12
Toshiba F12
Samsung F12
IBM F12
Fujitsu F12
Haier F12
Founder F12
Tsinghua Tongfang F12
MSI F11
BenQ F9
Gigabyte F12
Gateway F12
Emachines F12
Sony ESC

Compatible machine Boards
Asus F8
Gigabyte F12
MSI F11
Ying Tai F9
Soyo ESC or F12
Seven Rainbow ESC or F11
Asrock F11
Spartan ESC
Ang da F11
Dual-sensitive ESC
Xiang Sheng F10
Elite ESC or F11
Allied F11 or F12
Foxconn ESC or F12
Top Star F11 or F12
Ming Szeto ESC
Ying Tong F8
Jet ESC
Intel F12
Jay Micro ESC or F8
Ming F12
Pan UK ESC
Pan ESC
Guan Ming F9

Desktop
Lenovo F12
HP F12
Acer F12
Dell ESC
Shenzhou F12
Asus F8
Founder F12
Tsinghua Tongfang F12
Haier F12
BenQ F8
Press the Startup shortcut key to enter a Select Device page, on this page select the mobile media to start to enter the micro-PE toolbox.