TL-WDR6500 Internet control network topology
A small enterprise uses TL-WDR6500 as a router, the need to achieve the manager computer is not limited, all employees can only access specific websites and applications at work time, other time online is not limited. Create the following configuration table as required:
Note:The preceding parameter is for reference only. When setting a rule, the rule description name can be customized.
Log on to the vro management page and click
Internet access control
>
Schedule
>
Add a single entry, Add
Working hours, Detailed settings are shown in the following figure:
Add rules for other time periods according to the same setting method. The general rules are as follows:
1
Enter the domain name of the target website
Click
Internet access control
>
Access target
>
Add a single entry, Add Company website domain name (take www.tp-link.com.cn as an example), as shown in the following figure:
2
Enter the target
IP
Address
Add an access target. Add a DNS service as an example:
Note:You can also select the service you want to set in the common service port number.
3
Add other rules
Use the foxmail client software to send and receive emails. Common ports are:
25
,
110
,
53SMTPS Port
465And IMAPS ports
993,
Common QQ logon ports:
8000
,
443.
Add rules in sequence. The specific rules are as follows:
Note:: The relevant parameters in this article are for example only. Specific open ports and destination IP addresses are subject to actual requirements.
1
Add manager
Click
Internet access control
>
Host List
>
Add a single entry, Add the manager's MAC, as shown in the following figure:
Note:Set the manager's MAC address to prevent other computers from modifying the IP address to obtain the Internet access permission.
2
Add employees
Because the number of employee MAC addresses is large, adding one by one will multiply the rule list, which can be achieved through IP address segments, as shown in the following figure:
Note:The IP address segment may contain the manager's IP address. The two do not conflict according to the matching rules.
The rules are as follows:
1
, Add manager Internet rules
Click
Internet access control
>
Rule Management
>
Add a single entryTo add access rules for the manager computer, as shown in the following figure:
2
Add Internet access rules for employees
Add internet access permission rules for other employees. The following example shows how to add a work time rule:
Add access rules for employees to send and receive emails, log on to QQ, and non-work hours in sequence. After the settings are complete, the general rules are as follows:
After setting all the rules, click
Enable
Internet access control, default filtering rule selection
All data packets that comply with the configured internet access control rules can pass this route, Click
Save.
Note:The default rule selected here is filled in according to actual requirements. "allow" means that the set rule is whitelist, and "deny" means that the set rule is blacklisted.
So far, the Internet access control function has been set up. All computers in the office network will use the Internet according to the configured rules.
