How to Set Up A vswitch to achieve shared Internet access for several computers

After studying how the vswitch can be set to achieve shared Internet access for several computers, a friend asked me to solve the problem of how the vswitch was set up and asked many people for a satisfactory response. The following describes how to achieve Internet sharing.

How to Set Up A vswitch for help: I have just installed China Netcom ADSL, and there is a cat with a route. The model is Shanghai Bell's ADSL HOME PLUS 500, S6307MV, there is a TENDA5/8/16/24 Ethernet switch, and two computers need to share the Internet. How can I set it? Because of my computer idiot, the more detailed the explanation, the better. It is best to describe the specific setting steps (one of them cannot be used as the host, the host cannot be used, and the other cannot be used, you must have two servers that can access the Internet at any time .) thank you!

PS: on my computer, the network connection has a local connection, broadband connection, and 1394 connection. Please specify the connection on which you want to set up. question added: In the past, you had to click broadband connection to manually connect to the Internet. Now, after setting automatic dialing for a cat, one of them can be connected without a bandwidth connection, however, the other cannot connect to the Internet.

How to set the vswitch Questioner: 1997-the first-level best answer is to set the IP address 192.168.1.2 on any machine, subnet mask 255.255.0, and gateway 192.168.1.1

◆ Enter 192.168.1.1 in IE, And the account and password are both admin.

◆ Click "WAN" under "Advanced Settings" on the left and select VPI/VCI based on local parameters.) Click "edit ".

◆ Select ubr without pcr for "service type" and click "Next ".

◆ Select "PPP over Ethernet (PPPoE)" and click "Next ".

◆ Fill in the ADSL account and password, the service name is not required, the authentication method is AUTO, the following "On-Demand dial Using idle time timer)" and "ppp ip extension" can not be hooked.

◆ Enable IGMP multicast and WAN services. Check "enable IGMP multicast" and "enable WAN service" and click Next.

◆ Click "save.

Local Connection, broadband connection, 1394 connection, local connection refers to your network card, broadband connection is a built-in dial-up software in windows, you use a route to access the Internet, you can directly delete, the 1394 connection is a 1394 FireWire interface, which is used by DV machines. Do not worry:
VPI/VCI Con. ID Service Interface Protocol
1/39 1 UBR mer_000039 nas_000039 MER
8/35 1 UBR br_8_35 nas_8_35 Bridge
0/35 1 UBR br_0_35 nas_0_35 Bridge
8/81 1 UBR br_8_81 nas_8_81 Bridge
0/100 1 UBR br_0_100 nas_0_100 Bridge
0/32 1 UBR br_0_32 nas_0_32 Bridge
0/67 1 UBR br_0_67 ppp_0_67_1 PPPoE

You can go to google to search for how to set the vswitch. Your local place name + Netcom + VPI/VCI can usually find your local VPI/VCI value, for example, 0/35, click Edit on the right of "0/35 1 UBR br_0_35 nas_0_35 Bridge. Then proceed to step 1.