How to set up a wireless router to be on the same network segment as the switch

1. Login 192.168.1.1 (router default IP address, with the network cable configured to connect to the LAN port) into the router settings

Point LAN port Settings, the IP address to the switch with a network segment of the IP address (192.186.118.100), modified to save, restart the router into effect.

2. Select a DHCP server:

Select the DHCP service, fill in the router-configurable IP interval (192.168.118.100,192.168.118.199) at the start and end addresses, enter the proxy server's IP address (192.168.118.1), and then enter the DNS used by the proxy server (202.117.112.3), save reboot router takes effect.

3. Other Settings:

Password settings and user name settings are easy, and are not described here.

(1) The laboratory router user name: tp_link_1303 Password: s1303

(2) This router gateway address: 192.168.118.100, must use the wired to log in.

4. Cable location

Be careful not to plug the network cable that is connected to the switch into the LAN port, which should be plugged into the WAN port like a normal network cable.