Method One: Use the driver Life test to install the scanner driver. When your computer needs to connect to a scanner, you can first use the driver Life detection scanner to find the matching driver. Drive life with a variety of brand scanner drivers, and also provide universal scanner driver download. So no matter what brand your scanner is, driving life can intelligently match the most appropriate scanner driver. Open the drive life, a key detection drive, such as direct detection of the scanner driver, directly click the installation can be.
Method Two: Make computer settings. If the driver is not able to detect the scanner driver, then the computer itself needs to be set up. Open the Start menu of your computer, select "Devices and Printers", click "Add Device" in your device and printer, select the scanner you want to add, and if you add it, you can install the scanner driver directly here. If the add is unsuccessful, you will also need to set up your PC further.
Scanner driver added is not successful, the computer will automatically pop up the following image, click on the Control Panel "Administrative Tools", click "Services", drop-down select Pnp-x IP Bus Enumerator, the service is disabled, set it to "automatic." You can successfully install the scanner driver by re-selecting Add device after enable.
Method Three: Use the driver clinic to repair the scanner driver. If you cannot add a scanner driver as described above, it is recommended that you turn on the driving clinic that drives life. Select "Scanner is not available" in the peripheral drive failure, which resolves the "No image scan or scanner" issue, and you choose to repair the scanner driver with one click.