How to toggle layers in CAD software

For more than a layer of drawings, in the use or view, the general will use the extraction layer or switch the way to pull out the layer you need. This time, small series for you to explain the CAD switch layer method and steps.

First of all, let's first clarify the basic ideas about switching layers in CAD software. In the switching function, CAD software is able to achieve the direct setting of the layer, the modification of the entity attributes. The basic layer which can realize the switch can have contour line (solid) layer, thin solid line layer, center line layer, dashed layer, double dotted layer, section layer, callout layer, 0 (virtual) layer, and so on, each layer of the switch steps are similar, here we explain the content of the thin solid layer of the layer transformation as an example to learn.

1, open the multiple layers of the drawing, call the mechanical menu of "accessibility", select "Layer Transform Tool", and then select "Thin solid line layer", as shown in the following figure:

2, according to the instructions of the software, the use of the return key or ESC keys can be quickly achieved switching.

Of course, in addition to mechanical CAD exists in this mode of switching, CAD software can also have the following two ways to switch:

Method Two: Using the layer switch command Laytrans, input back, load contains the standard layer of the drawings, the original drawings map in, select the conversion, according to the hint can be completed;

Method Three: Use the Quick Select command qselect, input carriage return, set up in the pop-up window inside the object that need, make sure to launch, set oneself need layer.

This paper is selected from: "How to switch layers of CAD" http://www.zwcad.com/jishushequ/zwcadwenti/1222.html