How to use the disc to repair the system detailed steps

Here are some common systems for repair and installation methods:

The first method of installation:

1, click the "Start" menu, click "Run"

2. Enter CMD carriage return

3, Input command Sfc/scannow

4. Insert System CD

The system will automatically compare and repair the system files on the hard disk with the files on the system disk

If it is not, follow the method below.

First, setting the optical drive boot priority.

1 Restart the computer, press the DEL key into the BIOS (notebook press F2 into the BIOS, set similar. )

2 Use the ARROW keys to select Advanced BIOS Features

3) Enter the BIOS setup page

4 Select the boot Device or (1st boot Device) through the arrow keys

5 Use up and DOWN ARROW keys to select CDROM

6 Press ESC to return to the BIOS setup interface.

7 Use the arrow keys to select Save &exit Setup

8 Press ' Y ' key to return, restart the computer

The following steps begin to enter the installation:

1 Restart the computer, the highlight bar with the arrow keys to move to CDROM, at this time, the XP CD into the CD-ROM drive

2 When the screen appears press any key to the boot from CD, pressing any key immediately after the start into the installation interface.

3 first will be prompted to continue the installation by return, press "R" into the Recovery Console or press "F3" exit, then press ENTER, and do not press "R", or enter the Recovery Console. The next screen appears "Setup is searching for different versions of Windows," after which you will see if the installer can find the original system on your hard drive and choose "Fix-Reinstall" If you find it. Further down the operation according to the Chinese prompts can be.

The second method of installation:

1. When using Windows XP system repair, restart your computer and put the Windows XP system installation CD in

The optical drive, the screen will display the message "Press any key to the boot from CD" (pressing any key open

When booting from a CD-ROM, press any key such as "Enter".

2, when the screen shows "Windows XP Professional Installer, Welcome to install the program" information, press

The "Enter" key. Note that the "R" key cannot be pressed here, and if the "R" key is pressed,

Starts the fault console hotfix for the Windows XP system.

3, in the presence of the "Windows XP installation protocol, Windows XP Professional end user Installation Protocol"

interface, press the "F8" key and agree to accept the license agreement.

The Windows XP Professional installer will appear on the screen, if the following Windows XP

There is a message in the pack that the installer can try to fix. Display in the list box below the window

The Windows XP installer that needs to be repaired. If there are multiple words, use the up and down arrows to make the

The system is in a highlighted state and the "R" key is pressed at the end.

4. When the screen displays "Windows XP Professional installer, Setup has attempted to update the following

When Windows is installed, press the "Enter" key.