How to Use u to start a USB flash drive to reinstall the system with one click

How to Use u to start a USB flash drive to reinstall the system with one click

At present, Microsoft has stopped the technical support for the XP system, so many will face the re-installation of Windows 7 or Windows 8 System for the computer, so how should we reinstall the computer system? The tutorial you want to introduce today's u startup editor is to reload the system with one click on your computer.

1. The hard disk mode must be changed before Windows 7 or Windows 8 is modified for the Windows XP system. Otherwise, the blue screen status of the computer may occur during system reinstallation. So before reinstalling the system with one click on the computer, we press the corresponding shortcut key to enter bios settings, then select the "Advanced" option, find "HDC Configure As" and press the Enter key, in the pop-up window, select "AHCI" and press enter to confirm, as shown in:

2. Insert the prepared usb flash drive with win7 system image file into the usb Plug-in of the computer, restart the computer, and press the corresponding shortcut key when you see the boot screen, then, select usb boot in the boot Option Selection window and press the Enter key to go to the u boot v5.1 main menu interface, as shown in:

3. On the main menu page of u startup v5.1, move the cursor to "[02] Run u to start win2003PE enhanced edition (recommended for installation)" and press the Enter key to enter the win2003PE system, after entering the PE system, double-click "u start PE one-click Installation tool" on the desktop. The program will automatically detect the system image files on each disk and display them for selection; select the system image file to be installed and click "OK", as shown in:

4. Click "yes" in the pop-up "UQDGhost" Prompt window, as shown in:

5. After completing the above steps and clicking the "yes" button, next, you only need to wait for the win7 system image file to be automatically decompressed and click the "Yes (Y)" button in the pop-up "Information prompt" window after the decompression is complete, as shown in:

6. After completing all the above operations, we only need to let the computer continue the subsequent system installation process and wait patiently for the system installation to complete and restart the computer to enter the desktop, as shown in:

At this point, the method of using u to start the USB flash drive to reinstall the system with one click on the computer has been introduced. have you learned?