How two computers share files (XP and WIN7)

Check if the physical connection between the computers is normal

Need to check the network card, network cable, switch and other devices are working properly, before checking to restart the device to see whether it is normal. For example, the NIC can uninstall the reinstall, the device's work LED is not normal, you can restart the device. )

Second, Windows XP system needs to check the following points

1, check in the local area network "computer name" can not be the same, "workgroup" must be the same. In the diagram, open My Computer right---properties---computer name to view computer name and workgroup. If you need to change, the following figure prompts you to restart your computer to take effect after you change it.

2, check the computer in the local Area network administrator user name. To change the administrator user name, open the My computer right---manage---Computer Management---Local Users and groups---users.

3, check IP, subnet mask, gateway, DNS, IP set in the same network segment, subnet mask, gateway, DNS resolution, and must be selected "Microsoft Network file and print sharing." In the diagram, open the start setting, network connections, local Area Connection, right-click Properties, click General, check whether the pair of "file and print Sharing for Microsoft Networks" is selected, select Internet Protocol (TCP/IP) Click Properties to view IP address Subnet mask "gateway" "DNS".

and "DNS resolution" settings, need to automatically get, in the "Start" "Run" input "CMD" after the return, in the command line input "Ipconfig/all" carriage return, as shown in the figure, you can see we are looking for "DNS resolution."

4, need to check whether the Server service is open, in the "Run" input services. MSC to enter, open service, as shown in the figure, you need to open this service.

5, check the firewall is closed, turn on the "Start" "Settings" "Control Panel" "General", if the "Off (not recommended)", you do not need to change the settings. If enabled (recommended), click "Exceptions".

Please tick "File and Printer Sharing".

6. Check the security Option "Network access: Do not allow anonymous enumeration of SAM accounts" is disabled (this setting is only valid for guests), and "account: local account with blank password only allow console logon" deactivate. Enter "Secpol.msc" in "Run" in turn, and set this up in the local Security settings local policy security options.

7, check the use of simple folder sharing is used, turn on the "My Computer" Explorer Tools Folder Options "View", the "Use simple folder sharing" of the hook to remove. As shown in figure

8, check whether to set up a shared folder or a shared letter, (here set E disk as a shared disk, you can also set any disk character or any folder on the disk as a shared folder, and then open the "My Computer" right mouse button "explorer" "Local Disk (E)" Right "property" "Share" select "Share this Folder", The share name is the default, the note type "E" and clicking "OK" is normal. If you need to set a permission root, click "Permissions", "add" the appropriate user, and assign the appropriate permissions.

Through the above check settings, you can access the LENOVO1 machine in the host, but see you use the Administrator or guest access.

9, check the administrator login is normal, on the host double click "Network Neighborhood" "View workgroup Computer", in the workgroup open "Lenovo1".

Open "Lenovo1" in "Workgroup", also can enter "Lenovo1" in the host's "Running" Address bar faster, the user name is "Lenovo1" The password is empty, therefore does not need to enter.

Click "OK" to enter the "Lenovo1" of the shared letter "Local Disk (E)".

Note: In the future, we will not enter the username and password when landing "Lenovo1".

10, check the use of the Guest account is able to log in

(1) The Guest account is not enabled, turn on "My Computer" right-click "Manage" Local Users and Groups "user" "Enable Guest".

(2) Enter "Secpol.msc" in "Run" to start the local security setting select "User Rights Assignment" to delete the "guest" user in "Deny access to this computer from the network". All users in the "Deny login as a service" and "refuse to log on as a batch job" are also deleted.

(3) In security settings, in Security options, "Network access: Sharing and security mode for local accounts" changes "classic" to "Guest only".

Note: The above setup operation requires a reboot of the computer to take effect.

Three, the Windows 7 system needs to check the following items (Windows 8 system similar)

1, check whether the computer is in a network segment and the same workgroup

Right-click the Computer property

2, check whether to turn off password protection sharing and open network share

Click on the lower right corner of the network connection icon (different network environment, the icon slightly different), in the pop-up menu click "Open Network and Sharing Center."

Click Change advanced sharing settings in the upper-left corner

According to the actual needs to choose

Look for password protected sharing in the menu and save changes after you select Turn off password protected sharing

Find file and Print sharing in the menu select Enable File and Print sharing to save changes

3, check that Windows 7 "Guest user" is open

Right click on "Computer" click "Manage"

In administration, select the Guest user in Local Users and groups

Remove the "account is disabled" tick and open the user.

4. Check if guest is disabled in local Group Policy

Enter "Gpedit.msc" in "Search programs and files" to quickly start the local Group Policy Editor

In turn, open Local computer, computer Configuration, Windows settings, security settings, local policy, user rights Assignment, and double-click Deny access to this computer from the network.

Select "Guest" and click "Delete" to "OK".

5, check whether the shared files specify users and assign permissions

Turn on the Select shared folder right-click Property ' Share ' to select ' Specific user '.

Click on the arrow to select the user (such as guest) or enter the user directly, click "Add", select "Guest" "permission level" as needed, and click "Share".

Iv. Windows XP systems and Windows 7 systems when accessing each other

When the Windows XP system and the WINDOWS7 system visit each other, according to the above Windows XP system under the inspection and WINDOWS7 system inspection, as long as the exclusion of the normal access between.

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join