HP Pavilion sleekbook 14 installation Windows 7

The first is to install this article

Http://zhidao.baidu.com/link?url=yCgzhDhX0OFdntS4s-SMe-3sFdUQu2mPw9GB_bZfFGhT42o4-w65yM7_ Zur0l2cuv9y1kt0hrsidmlixqzqjrwtultpdo-fjvxhspqreure

However, the problem I encountered is that there is no way to identify the hard drive, then I downloaded from the official website:

Http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=zh-hans&cc=cn&dlc=zh-hans&sw_ lang=&product=5343794#n558

And then found that the hard drive is still not found, because the right part of the USB in this notebook is USB 3.0, but my CD USB is 2.0 so there may be a problem with the transmission, so it is not recognized.

So go back to the BIOS and set USB 3.0 to auto.

In the second, found that there is no way to install the system on the main partition 100G, there will be a 0x00001 (remember not very clear) of the error, so the way is to go back to the BIOS to start the order of modification, to ensure that notebook disk start as the first, and then from the New start press F9 Select the option to start, Load the driver from the new, and finally you can install it.

The reason to load the drive is because there is a solid-state drive in this notebook, the SSD has a startup acceleration technology, so there is no way to recognize the hard disk, a total of 32GB, but only see 2 G, as long as the physical hard disk 500G can be identified by the system installed on this, and then accelerated on the solid-state drive