Configuration analysis
#
System-view
#
Sysname AC
#
VLAN Batch 2 6 \ Create WLAN management 2 Business 6
#
INTERFACEGIGABITETHERNET0/0/7 \ Aggregation layer connection port and transmission
Port Link-type Trunk
Port Trunk Allow-pass VLAN 2 6
Quit
#
DHCP enable \ Turn on DHCP
#
Interface VLANIF2 \ Configure the WLAN management VLAN and turn on port DHCP
IP address 10.10.2.254 255.255.255.0
DHCP Select interface
#
Interface VLANIF6 \ Configure WLAN Service VLAN and turn on port DHCP
IP address 10.10.6.254 255.255.255.0
DHCP Select interface
#
WLAN Ac-global Country-code cn \ Config Country code
#
WLAN Ac-global AC ID 1 carrier ID other \ Configure AC ID, operator ID
#
Wlan
Wi-Fi AC source Interface vlanif 2 \ Configure AC's Origin VLAN
#
Ap-auth-mode mac-auth \ Configure AP authentication mode for Mac authentication
#
Display Ap-type all query device type of AP
#
AP ID 1 Type-id mac 3400-a304-0b00 \ap id+ap type +mac address
#
Ap-region ID 6 \ Create domain and join AP to Domain
Quit
AP ID 1
Region-id 6
#
Interface wlan-ess0 \ Create a Wlan virtual interface and add a business VLAN
Porthybrid Pvid VLAN 6
Port Hybrid untagged VLAN 6
#
WLAN \ Configure WMM templates, RF templates (default) and bind to each other
Wmm-profile name WLAN
Radio-profilename WLAN
Wmm-profile name WLAN
#
Security-profile name WLAN \ Configure security templates, WEP authentication, shared keys
Security-profile WEP
WEP Authentication-method Share-key
WEP key wep-40 pass-phrase 0 cipher 12345
#
Traffic-profile name \ Configure traffic templates
#
Service-set name WLAN \ Configure data forwarding mode for tunnels and service templates
SSID WLAN
Wlan-ess 0
Service-vlan 6
Security-profile name WLAN
Traffic-profile name WLAN
Forward-mode Tunnel
#
AP 1 Radio 0 \ Configure the AP corresponding VAP and distribute the configuration
Radio-profile name WLAN
Service Name WLAN
Quit
Commit AP 1
Huawei Device channel defaults to automatic tuning
Huawei ac6005+ Huawei AP5010 Cn-agn side-hanging connection