If you change the environment, you don't have to worry about switching network configurations easily.

For network administrators, they often need to access different configurations in the network. Therefore, they need to reconfigure each time they change the environment, which is very troublesome. In fact, in an enterprise, we can fully prepare several frequently used network environments and easily switch between different situations.

I. configuration file Method

All the configurations in the system are saved in the configuration file. We can create corresponding configuration files for different network environments. When necessary, we only need to use the corresponding configuration files to enter the system.

Open the System Properties window, switch to the hardware tab, click the hardware configuration file button, and select Profile1 in the available hardware configuration file list) click "copy" and name it "ADSL ". To argue for other methods, we can continue to select "Profile1 current)" and click "RENAME" to enter "edu ". In this way, when you start the computer, there will be a selection list similar to the boot menu, select ADSL to enter, the network card is correctly configured. In the future, you only need to select the configuration file to use directly through the network corresponding to the configuration file.

2. Easy IP Change

If you do not want to install dual systems, you can use a software named IP Change to easily Change the network environment. To begin. If you want to modify the settings, you only need to enter the new IP address, subnet mask, and other information in the "modify target" on the left. after entering the information, click the "Start new configuration" button at the bottom, in the pop-up menu, select the project to change settings, such as IP address, DNS settings, or change all settings, so that you can quickly change the network settings.

TIPS: to make the switchover faster, you can enter the name of the current setting after "common IP settings" in the upper part of the page, click "save common Settings" and select "Save Current Settings" in the pop-up menu ". In this way, you only need to right-click the icon on the taskbar and select "permanent one-click" in the pop-up menu, so that you can easily switch the network environment in its sub-menu, this avoids Repeated input of information every time.

Iii. Command switching method

If you do not want to use the help of the software, we have another option, that is, to use the netsh command to help us.

First, we configure the network parameters of the education network environment, and then enter "netsh-c interface dump> c: \ login" in the command prompt.

Two configuration files have been generated in different network environments. For example, to switch to the campus network environment, you only need to enter "netsh-f c: the \ 1.txt command is just a stay. to switch to the ADSL environment, you only need to change the configuration file of the command.

How about it? There is always one of the three methods that suits you! Quickly apply them to your work, so as to avoid frequency modification network configuration troubles.

Related Articles]

• Easy Wireless Network Configuration
  

• Network Configuration management tools are the key to VoIP success
  

• Network Configuration of the VLAN of the medium/small LAN switch