In Vultr VPS, the entire pptp vpn process is manually built using Debian 8 i386 (jessie) as the operating system platform.

Source: Internet
Author: User

In Vultr VPS, the entire pptp vpn process is manually built using Debian 8 i386 (jessie) as the operating system platform.

Update the server and install the PPTP Service

Apt-get update

Apt-get upgrade

Apt-get install pptpd

Edit/etc/pptpd. conf

Find # localip and # remoteip, delete # And set the ip address

Localip 172.16.31.254

Remoteip 172.16.31.234-238

Edit/etc/sysctl. conf

Remove # net. ipv4.ip _ forward = 1 and enable ipv4 forward.

Run sysctl-p after modification.

Edit/etc/ppp/pptpd-options

Modify dns server address

ms-dns 8.8.8.8

ms-dns 8.8.4.4

Edit/etc/ppp/chap-secrets

Add a PPTP account

[Note

Format:

Username1 pptpd password *

Username2 pptpd password 172.16.31.234

The first column is the user name, and the second column is the server name (pptpd by default, which must be consistent with the value of the name row in the/etc/ppp/pptpd-options file)

The third column is the password, and the fourth column is the IP limit (not limited)

The format of the first line is not fixed Client IP address, and the format of the second line is fixed Client IP Address

]

Use iptables to create NAT

Install iptablesapt-get install iptables

Add a rule to the nat table

iptables -t nat -A POSTROUTING -s 172.16.31.0/24 -o eth0 -j MASQUERADE

[Note

Eth0 is the name of the network card. You can view it through ifconfig.

]

Set MTU

iptables -I FORWARD -p tcp --syn -i ppp+ -j TCPMSS --set-mss 1356

[Note

Recommended Vultr

  Note:We recommend grouping ing a MTU of 1450 on your private network. Using a larger MTU will result in poor performance.

]

Iptables rules will be cleared at the next restart. To prevent iptables loss after the machine is restarted, run

Iptables-save>/etc/iptables-rules

Edit the/etc/network/interfaces File

Find eth0 and add the following sentence at the end of eth0 settings:

Pre-up iptables-restore </etc/iptables-rules

In this way, when the network adapter eth0 is loaded, it will automatically load the configuration we saved with iptables-save in advance..

Restart PPTP Service

/Etc/init. d/pptpd restart

Edit/etc/rc. local

Add boot start

/Etc/init. d/pptpd restart

Thank you for your ideas and code!

Refer to the blog post in no particular order:

Debian vpn-time travel lazy cat-blog Park

Build a VPN In Debian

Debian pptp vpn configuration tutorial-reizhi

 

 

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.