Install XP SP3 on a USB flash drive

After a long time, many. EXE files were modified, and finally a difficult decision was made to fight the virus.

 

After half a day, you still cannot kill the entire application. to completely delete the installed application, it is almost the same as reinstalling the system.

 

Finally, I decided to reinstall the system and find the XP SP2 disk. Who knows it is useless? I don't know whether it is a disk problem or a problem with the optical drive.

 

It is best to download XP SP3 only on other netbooks and install it with a USB flash drive.

 

 

The main content of this article comes from http://benyouhui.it168.com/thread-844475-1-1.html

 

 

Use winsetupfromusb 0.1.1.

 

USB boot is required for the motherboard.

 

 

Step 1: Install winsetupfromusb. After installation, run the winsetupfromusb shortcut on the desktop. Open the winsetupfromusb program window, format the USB flash disk, and click HP format tool (P format too,

Step 2: In the pop-up hp usb disk storage tool window, click the "Start" Key (make sure that the "device" item is the USB flash drive you want to format)

Step 3: After formatting, click the close key in the hp usb disk storage tool window to return to the winsetupfromusb program window, click "Browse" and select the path of the XP installation file (for example, the drive letter of the XP installation disk ),

Note: Decompress the downloaded xp sp3 ISO

 

Step 4: select the correct path of the XP installation file and click "go" to copy the files required for XP installation to the USB flash drive.

 

Step 5: After the file is successfully copied, the following prompt will pop up (roughly speaking, the installation of XP using a USB flash drive requires three boot times from the USB flash drive ):

 

Step 6: click "OK". Unplug the USB flash drive and insert it to another computer that uses the USB flash drive to install the system. boot the computer into the BIOS (currently, most laptops press f2 to enter the BIOS ), set the boot priority of the USB flash drive to the highest. (Note: usb hdd option)

 

Step 7: Save the settings and restart the computer. The following screen is displayed (you do not need to press any key. Wait for 20 seconds and the computer will automatically enter the XP installation Interface ):

Note: If Windows has been installed on the hard disk
XP. If you want to reinstall the system through a USB flash drive, the existing system in the hard disk may be automatically started without any operation on the screen above. In this case, the "second part of XP
When professional setup + start Windows for first time, manually adjust the option to "first part"
Of Windows XP Professional setup "and press enter to confirm.

 

Step 8: Install Windows XP as usual:

Note: During the installation of XP, it will be restarted twice to continue booting from the USB flash drive without any keys, the USB flash drive installer will automatically go to the graphical installation interface, user name, computer name, and other setting interfaces after the installation of XP, until the first time you log on to the XP desktop, You can unplug the USB flash drive.

 

In addition, I will also encounter a flat screen during the installation process. After the screen is turned off, I will restart myself and then it will be normal ..

 

 

It seems that my USB flash drive is poor. It took me a lot of time.