Install ghost xp sp3

Install ghost xp sp3
Many netizens do not install the deep ghost xp sp3 system after downloading it. In fact, there are three methods, one is to install the CD, the other is to start the installation system on the USB flash disk, and the third is to directly install the hard disk, the first two cases are used when the system cannot be started. I would like to explain in detail how to install the deep ghost xp sp3 by burning a CD?
1. Enable the optical drive:
1. Restart, press Del to enter BIOS, find Advanced Bios Features (Advanced BIOS parameter settings), and press enter to enter the Advanced Bios Features (Advanced BIOS parameter settings) interface.
First Boot Device starts at the First Boot.
Second Boot Device starts at the Second Boot.
Third Boot Device starts at the Third Boot.
The general settings are as follows:
First Boot Device is set to HDD-O (Hard Disk Boot)
Set Second Boot Device to CDROM (Boot with optical drive)
Set Third Boot Device to FIOPPY (soft drive)
2. When the system needs to be restarted from the optical drive, press DEL into BIOS settings, find the First Boot Device, and set it to CDROM (the optical drive starts ), the method is to use the keyboard to select the First Boot Device, with PgUp or PgDn flip the HDD-O to CDROM, Press ESC, press F10, then press Y, press enter, save and exit.
After the optical drive is enabled, place it on the disc and restart the computer:
1. The following installation system menu appears when you place the package on the CD.
Select 1 to install the system.

Then the copy system interface appears.
　　
After the copy is completed, the system will be automatically restarted to enter the installation process

Detect computer hardware
　　

Installing
After 5-7 minutes, the system will automatically install and restart after the installation is complete!
After the restart, a new system will appear in front of you! Is it easy?