Install the original win7 XP with hard disk and common installation errors

Install the original win7 XP with hard disk and common installation errors xp with the original Hard Disk: 1. After the USB flash drive starts the WinPE system, copy the ISO file of the XP SP3 system image from the USB flash disk to a non-system partition on the hard disk, and decompress the I386 folder in the ISO image to the root directory of the partition using the WinRAR program in PE, for example, D:/I386. 2. Directly unplug the USB flash drive. Cause: If the installation file is not unplugged, the next step is to copy the installation file to the USB flash drive instead of the C drive. Because the PE system is actually running in the memory, pulling out the USB flash disk does not affect the running of the PE system and program. 3rd, enter the IMG folder and double-click winnt32.exe. The installation interface of the XP system is displayed. This interface is the same as the interface for reinstalling the XP system in Windows. Here we have installed it like a CD. Next step .... it is worth noting that: 1. The format of the C drive and the partition with I386 must be FAT32. If it is NTFS, an error will be reported when winnt32.exe is executed. 2nd, if your partition is converted into fat32by using ntfsformat, and the execution of winnt32.exe still reports an error, restart and execute it again. The above is my own practice! Use a hard disk to install the original win7: 1. Download the windows 7 7057ISO image, use a virtual optical drive to copy it to a non-C drive (such as D: \ 7057) 2. Set D: \ 7057 directory bootmgr and boot directory (in fact, as long as the boot. sdi and bcd files) are copied to the c root directory, and a sources folder is created under the C root directory. (You do not need to obtain administrator permissions in XP) 3. Run the boot command in D: \ 7057 \ sources. copy win to the sources folder created on drive c. 4. Run cmd as an administrator. Then enter c: \ boot \ bootsect.exe/nt60 c: prompt successful. 5. Restart when the installation interface disappears, the installation interface of Windows 7 will be displayed. At this time, the option 6 of cmd command debugging will be fixed first. Enter "D: \ 7057 \ sources \ setup.exe" (without quotation marks ), start installation and then, just like the installation on the CD, next step .... OK!