IPS blending mode terminates TCP session testing with other interfaces

1. Test topology:

Note: The TCP Reset command cannot be issued from the original sensor port of the IPs because of the constraints of the simulated environment, so the test emits a TCP reset with the IPs other interfaces.

2. Basic configuration:

R1:

Interface fastethernet1/0

IP address 10.1.1.1 255.255.255.0

No shut

R2:

Interface fastethernet1/0

IP address 10.1.1.2 255.255.255.0

No shut

R3:

R3#vlan DA

R3 (VLAN) #vlan 10

VLAN Ten added:

name:vlan0010

R3 (VLAN) #exit

APPLY completed.

Exiting .....

int range F0/1-2, F0/13

SW MO Acc

SW ACC VLAN 10

Monitor Session 1 Source Interface FA0/1

Monitor Session 1 Destination Interface FA0/12

See more highlights of this column: http://www.bianceng.cnhttp://www.bianceng.cn/Network/Security/