Lenovo computer disk converted from GPT format to MBR format tutorial

1. Use the Windows 7 CD-ROM or u disk to boot, into the system installation interface;

2. Press SHIFT + F10 to open the command prompt;

3. Enter the "Diskpart" (Do not enter quotes, the same below), and press ENTER, enter the operating interface;

4. Enter: "List disk" to view the information on the disks. Watch the disk capacity to select. The 465G Disk 0 is the hard drive, 3852M Disk 1 is used for Win7 installation of U disk;

5. Input: "Select Disk 0", select Disk 0 for the current operation of the disks;

6. Input: "Clean", empty the current disk partition;

7. Enter: "Convert MBR", convert to MBR partition;

8. Complete the operation, close this command prompt window and continue to install the Windows 7 system in the normal way.