Lenovo e431 Notebook change hard drive mode BIOS setup in detail tutorial

To install the system with the hard disk, enter the BIOS and replace the hard drive with the first boot to reinstall the system. Different brands of computers, its BIOS setup method is also different. So how do Lenovo e431 notebooks change the hard drive mode? Today you hero Small series and you share the Lenovo e431 notebook change the hard drive mode BIOS setup detailed tutorial.

1, open Lenovo e431 notebook computer, in the presence of Lenovo logo Boot screen Press F1 shortcut key to enter the BIOS settings, as shown:

Bios

2, then use the left and RIGHT arrow keys to move the cursor to the "Config" menu, and then use the upper and lower arrow keys to move the cursor to the "Serial ATA (SATA)" option, press ENTER to execute, as shown in:

Bios

3. After entering the Serial ATA (SATA) window interface, we are able to see the SATA Controller mode option followed by "AHCI" in parentheses, and press ENTER to continue as shown:

4, in the pop-up window, use the UP and DOWN ARROW keys to move the cursor to "compatibility" to confirm execution by the Enter, as shown in:

Bios

5, complete the above operation, press F10 shortcut key to save the settings, will pop up the prompt window, press Y to confirm the save, exit and automatically restart the computer, the Lenovo e431 hard disk mode setting is changed to AHCI mode.

Lenovo e431 Notebook change hard drive mode BIOS setup in detail tutorial