Linux KVM Environment Install Windows Grub Boot install Windows system

Source: Internet
Author: User
Tags prepare tar extract vps
Writing an article by itself is a very painful thing, in particular, the writing of technical articles must be tested to be able to share, and the old left does not ensure that each user needs to refer to the time can be successfully completed, but I can ensure that when writing the article all the information is true in the current environment in the implementation of the process. And there may be errors, or even the user may make the old left to install can also be wrong, these problems are various factors.
After the "Install Windows Tutorial for Linux KVM Environment-partition letter and Mount Debian installation" article, it is only the first part of the completed, not finished, here also need to boot installation Gho system files to install the win system, Like we use the DOS fast restore system the same truth, in writing this article has been looking for the available Windows Gho system files, previously shared by netizens but found that several are address invalidation, here on the Internet to find a Windows2003 version is not clear whether it can be installed up, Try it anyway.
First step, upload the necessary documents
Here after we have installed the Debian environment, and according to the requirements of the need to partition and set the size of the letter, because the old left test this machine only 10GB hard drive, is not well-off so can only reluctantly partition up.
Here we need to prepare 3 files, namely maxdos.img (Http://soft.laozuo.org/iso/MAXDOS. IMG), Grub4dos.tar (Http://soft.laozuo.org/iso/grub4dos.tar), and key win system. Gho suffix system files. The first two old left from the Internet to find and then share it, for the system file one of the copyright issues, second file larger resources, three can not be sure to use, is not available here, or uncle to find me.
1, put the maxdos.img file in the/boot/boot directory (created by Mkdir/boot/boot)
2, the Grub4dos.tar file into the/boot/directory and TAR-XVF Grub4dos.tar extract files to the current directory.
3. Place the. Gho system files in the/dos folder.
Once the files are ready, we will need to continue with the VNC remote operation installation process.
Step two, boot the process of installing Windows system
After all the documents are ready, we still go to the VNC remote, after entering the interface we need to press C into boot grub.
1, into grub boot
If you see this interface, we also need to press the Send Ctrlaltdel button in the upper right corner and then press C to enter.
2. Input command
Enter the command line shown above, 2 lines, and enter after the carriage return.
The code is as follows Copy Code
Linux (hd0,1)/grub.exe
Boot
Select Maxdos.img to go to the next step.
3. Prepare Ghost System
Select Maxdos Toolbox
According to the prompt command, we enter the ghost carriage return to enter the System Restore.
4. Ghost Reduction System
In the early years, we installed the system with this ghost restore installed, this method is very fast installation, we have installed the system does not? It's all about using the Keyboard tab keyboard and the Enter key to select the file, which needs to be done through Local-disk-from IMAGE, here to find what we are ready for. Gho file, and then restore the system through this file.
Here to find our Gho file letter, and then choose to continue to find our set up the letter installed Windows system. Here is really a bit of cotton, estimated memory is too small cause (here test is used 512MB memory), originally do not continue to write down, but have written so much.
It seems to be done, we wait, because the SSD drive is estimated to be faster. I was going to find the internet spread of the XP system, but did not find, find a WIN2003, do not know whether it works, but the process is certainly the case. In short this method is purely toss, the general business is not so installed, was found to be sealed machine or even account, so the old left here is just a blind toss, the group of friends also let do not install, a waste of time, and then there is no need, really waste time, toss for a few days.
Estimated footprint is too poor, this test VPs to crash, the card is not progress here. In theory, such as advanced completion can be, the process should be not wrong, we have to set up after the installation of network cards and IP and DNS settings, so that the Internet can be. Old left no longer toss, is a waste of time, such a waste of time to see if there is no bottle to pick up the garbage, and then directly buy a win VPS or other methods.
PS: According to other users of the introduction of this method should be theoretical, however, in view of the fact that too much card, the old left did not wait for the final installation, if there is a friend has such a installation or the old left above the method of recording problems, you can leave a message to other netizens for reference, not because my article misled everyone, the above article is purely their own toss There is no guarantee that each person will be able to install.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.