Linux system remote access to Windows system

1. Start Linux and Win7 two computers in the virtual machine first

2, edit the Linux network card, set the IP address

Press A to enter, change the onboot=no to Yes, turn on the network card, change the bootproto=dhcp to static manually, continue to add the IP address, subnet mask and gateway below, Input complete press ESC key input: Wq save exit

Restart the NIC

3. Set the IP address of Win7 to the same network segment as Linux

4, in the virtual machine settings, the Linux and Win7 network adapter are changed to host-only mode

5, the Linux and Win7 at this time can ping the status

With Linux ping win7 need to shut down the Win7 firewall, including the rear remote win7 Also, click Control Panel in Win7, select system and Security

Click Windows Firewall

Click to turn the firewall on or off

Turn Windows Firewall up and down two all checked

6, because later need to use the Linux remote Win7, so need to be in the Win7 Remote settings desktop Right click on the computer Select Properties, click Remote Settings

Allow Remote Assistance to connect to this computer and allow computers running any version of Remote Desktop to connect two tabs tick on

7. Connect the Linux CD in the virtual machine setup

8. Find the location of the CD that needs to be mounted in Linux

9, with Df-h can see all the mount information

10, the CD-ROM mount to/mnt this empty folder, empty folder on the line, you can also mount to other empty folders, again with Df-h can see a new mount information

11, to/mnt This folder, you can see just mounted on the thing, we need to install the feature Pack in packages this folder

12. Install three function packs with rpm

13, the most important rdesktop this application pack RPM installation will have a constant dependency, so I set up a yum warehouse to install, yum files stored in/etc directory.

14, to yum.repos.d the establishment of the Yum Warehouse, in the YUM.REPOS.D directory see the default. repo file, delete, create your own new Abc.repo file for editing

15. Enter a to edit, enter the following content, edit complete Save exit

16. View the Abc.repo file you just edited, and use the Yum List command to see if the Yum warehouse is available

17. After entering Yum install rdesktop with the Yum Warehouse installation Rdesktop

18, enter Y confirm, installation completed

19. You can use Rdesktop for remote Win7 at this time

20, enter the user name password to log in

21, the successful landing, you can operate on the Win7, remember that before this must be closed win7 firewall, otherwise login not on

22. This experiment is completed.

Linux system remote access to Windows system