Add multiple Presses 1, pre-conditions
1) Ensure that the LoadRunner Agent is installed on the press, and start, there will be small satellites in the status bar.
2) If the added press and controller are in the same network segment, it is recommended to turn off the firewall. In the controller press Ping to connect the press, if passed, can be connected.
3) The local RPC service should be turned on and enabled in the Control Panel-management tools-services.
2. Steps
1) Enter controller, click Scenario-->load Generators menu, after the interface, the default will be a press, that is, the machine.
2) Click Add, add new Press input NAME:IP address, platform: operating system and other information, click OK
3) After completing the press Add, click Connec: Connect, if the connection is successful, the ready status will be displayed.
4) The above steps indicate that the connection is successful, and finally the distribution of the script on the press can be in percent mode.
LoadRunner Performance Test Add Windows multi-state presses