Making method of U disk WinPE system

WinPE (Windows Preinstallation Environment, Windowspreinstallationenvironment) is a WIN32 subsystem that has fewer (but very core) services, based on the XP Personal Edition kernel that runs in protected mode. These services are installed for Windows, network sharing, automatic low-level processing processes, and hardware validation.

WinPE lets you create and format hard disk partitions, and gives you access to NTFS file system partitions and internal networks. This preinstallation environment supports all mass storage devices that can be powered by Windows2000 and Windows XP, and you can easily add drivers to new devices.

Using WinPE helps you convert existing MS-DOS based tools to 32-bit windowsapis so that you can maintain these applications more easily in a standard development environment, such as Microsoft Visual Studio. WinPE includes hardware diagnostics and other preinstallation tools that support the standard Windows XP driver, and you do not need to do any other special work. For program developers, you can focus on the process of diagnosis, commissioning and development of the link. So today, we will be the next U disk PE system production methods.

1. What is needed is:

U disk Boot Disk tool is Uformat

128M u disk One, I'm using SD here.

2. The lower part comes step-by-step to teach you to make WinPE concrete steps:

1. Run Uformat, make usb-hdd; click on the U disk (if the U disk is divided into 2 areas, then select the first area), then click "Click here to choose the mode of work", select "HDD mode", then click "Start", then press the prompts to pull, insert U disk until completed.

Select OK.

When prompted to safely eject U disk, and then plug in a U disk

Insert again after you can see is writing, and then complete the prompt "Launch U disk production success" Exit Uformat.

4 Open U disk to view hidden file Command.com IO. SYS MSDOS. SYS

5 will download from the Internet USB-HDD-WINPE Compression Pack version has a lot of, the operation is the same. Copy to U disk after these steps will be completely the production of U disk PE

6.PE is finished, then reboot we also have to do bois boot sequence set reboot hold down del key

Enter Bois to set the first boot to USB-HDD

7. But completely this step after the U disk PE we also want to set a hard disk BOOT PRIORITY not set and can not be used unless the hard drive.

Be sure to set the USB device in front or directly from the system. This step is very key online search a lot of u disk PE can not be used is this reason 1. For my USB drive, 2 for the hard disk.

8.F10 Y fixed reboot do not use the tube to enter the startup disk.