Methods and frequently asked questions of using the mobile phone to carry Internet shared access through the Win7 System

This article summarizes some methods and frequently asked questions about using a mobile phone to share the Internet via Win7. For more information, see.

Fault symptom:

How can I use a computer to share a wired network for Android or iOS smart phones to access the Internet?

Solution:

Test Platform: Win7 system, Lenovo A60 mobile phone, non-Lenovo Android mobile phone (System Version 2.3.5 2.3.7), iphone, nokia e72i (s60 v3 System) Tip: the content in the document is the settings that need to be performed when an operation encounters a problem. If the operation is successful, skip the next step.1. start --- all programs --- attachments --- Right-click the command prompt and choose to run as administrator; 2. set the ssid and password. In the command line window, enter netsh wlan set hostednetwork mode = allow ssid = Name of the network you want to create (in english format) key = the password you want to set (at least 8 digits) Press enter, for example, netsh wlan set hostednetwork mode = allow ssid = alan key = 123456783. enable the bearer network. Enter netsh wlan start hostednetwork. A prompt is displayed when the bearer network is started. * Sometimes you may see that "the bearer network cannot be started. The status of the group or resource is not the correct status for performing the request operation ." Do not worry when you see this error. Go to the network and sharing center to check whether the virtual wireless network connection is disabled. After enabling wireless network connection 2, enter netsh wlan start hostednetwork. If you cannot see microsoft virtual wifi miniport (virtual wireless network card) in your network and sharing center, check the Device Manager to see this device. This is normal. This is the status without a virtual wireless network adapter If you cannot see microsoft virtual wifi miniport (virtual wireless network card) in your Device Manager, reinstall the wireless network card driver.

<

If you still cannot see microsoft virtual wifi miniport after installing the driver, open the command line prompt and enter netsh wlan show drivers to verify that the wireless network adapter supports this function. 4. Click the network connection icon in the lower right corner of the taskbar to check whether the created wireless connection is displayed. * If a connection named alan cannot be found, re-open the cmd command line window and re-enter netsh wlan start hostednetwork to view the connection again.5. right-click a broadband connection and choose Properties to enable sharing. Select virtual wireless network connection 2 (if there is no network connection option, check other network connection properties-whether or not the sharing has been set to be in use. deselect this option.) After the sharing is successful, the network connection status is 6. status of the mobile phone connection signal after successful sharing the mobile phone opens the webpage. If the mobile phone cannot open the webpage after connecting to the network, please manually specify the ip address in the mobile phone

Note:

The bearer network created in this solution will be automatically disabled as the computer shuts down. After restarting the computer, if you want to continue using the bearer network, you only need to run the "command prompt" program as an administrator again, and enter the netsh wlan start hostednetwork command to enable the bearer network.