Multiple WinPE startup methods

At this stage, the network of WinPE system is based on the basic ISO (IS_) and IMG (im_) Mainly, how the most streamlined WinPE and full-featured WinPE integrated into the common idea. Using Easyboot is easy to do this, easyboot because the interface is beautiful, easy to modify, became the CD maker's favorite. Here's a quick way to explain how to integrate multiple WinPE.

First of all, install the easyboot, Winhex (or UltraEdit), UltraISO these 3 software. Create a temporary directory on your hard disk, such as D:boot, and then build a two-level subdirectory ezboot to copy easyboot files Ezboot.dat,loader.bin,cdmenu.ezb (sample files) to the Ezboot directory.

1, first understand the WinPE CD START process:

Take the old Peaches WinPE Bootcd_070310.iso file For example, this ISO file is a bootable CD-ROM file, with UltraISO to open the ISO file, save the boot file to D:BOOTEZBOOTXP. BIF, extract all the files from the CD to D:boot.

From the above directory structure can be seen WinPE CD boot process, first boot file xp.bif, and then find Wxpe directory Setupldr.bin, read winnt.xpe, load Winpe.is_, Then wxpentdetect.com start WinPE, ie: XP. Bif->setupldr. Bin->winnt. Xpe->winpe.is_->ntdetect.com (Note: easyboot from version 5.08, joined the BCDW command, if your easyboot version than 5.08 New, are supported by the BCDW command. Copy Bcdw.bin to the top d:bootezboot from the Easyboot installation directory and use Run XP in the menu. BIF replaces BCDW Wxpesetupldr with the following command. BIN, note here to write the absolute path of the disc. The original xp.bif file can be deleted.

2. How to integrate the second WinPE of old Peaches:

Because the old Peaches's WinPE, the startup file is the same, so you need to rename it. To integrate the old Peaches Bootcd_070305.iso as an example, with UltraISO open save boot file for xp305.bif put to D:bootezboot, Wxpesetupldr.bin extract renamed setupldr.305 put to D: Bootwxpe. Here xp305.bif boot to find the file is Setupldr.bin, so to modify the xp305.bif file, with the Winhex open, replace all setupldr.bin for setupldr.305, save. The same winnt.xpe name, after extraction renamed to winnt.305 Copy to D:boot, with Winhex open setupldr.305, replace all Winnt.xpe winnt.305, save. The same winpe.is_ name is the same, after extraction renamed to Winpe305.is_, copy to D:boot, with Notepad to open the winnt.305, replace the inside Winpe.is_ winpe305.is_.

3, how to modify the external program directory name:

Multiple WinPE systems that use the same external program are unlikely, especially Xppe and 2003PE at the same time in a CD case. Above Bootcd_070305.iso For example, the extraction of external programs renamed to external program 305, copy to D:boot, Winpe305.is_ renamed Winpe305.cab (or. RAR), Open with WinRAR to get a winpe.iso file, open with UltraISO, extract Wxpesystem32pecmd.ini, open with Notepad, replace all the inside "external program" with "external program 305", Save and replace to the Winpe.iso file. The winpe.iso is then compressed to replace the winpe305.is_ copy with the D:boot. At the same time, modify the contents of the Winpe.ini file in the external program 305 directory and replace all "external programs" with "external program 305".

4. What is the difference between the Is_ (ISO) and the im_ (im_) startup files in the CD:

The contents of a file are different, such as winnt.305,im_ (im_):

[SetupData]

BootDevice = "RAMDisk (0)"

Bootpath = "WXPESystem32"

OsLoadOptions = "/minint/fastdetect/rdpath=winpe.im_"

Is_ (ISO) content is:

[SetupData]

Bootdevice= "RAMDisk (0)"

Bootpath= "WXPESYSTEM32"

Osloadoptions= "/minint/fastdetect/rdexportascd/rdpath=winpe.is_"

Note that the system directory and filename are not wrong (take RAMDisk as an example).

5, with Easyboot integration:

This step is not good to talk about, should be, each menu corresponds, to note that the selected "optimized disc file", "DOS", "Joliet", the last one to support long file (directory) name.

To introduce you to a quick start technique:

1, with WinRAR will winpe.im_ or Winpe.is_ extract winpe.img and Winpe.iso, replace the ISO image inside im_ or is_ files;

2. Revise Winnt.sif and winnt.xpe with Notepad, change winpe.im_ or Winpe.is_ to winpe.img and Winpe.iso;

3, replace the setup/setup.bat inside winpe.im_ and Winpe.is_ for Winpe.img and Winpe.iso;

In this way, although the WinPE volume increased (it is estimated that a CD is not a problem), but when the start to save the time to understand the pressure of CBA files, starting speed significantly increased.