NetScreen Webauth with Windows AD Account and group via Freeradius

Source: Internet
Author: User
Tags ldap ad server freeradius

Author Contact: [email protected]

I got a task to integrate we corp Windows AD with our NetScreen firewall Webauth function. Before this we firewall supports only

Local users, that's causes big work load to create accounts especially when the user number is grows and more.

To use Windows AD, LDAP firstly comes into mind but soon I found it's not usable as I even can ' t find where to define the LDAP search account and password. As I know on SRX this would work quite well and simply by using LDAP to interconnect with Windows AD from firewall.

Then I consider netscreen+ radius+windows AD. It's easy-to-find a lot of articles about using the IAS to achieve this, but it doesn ' t work for me

As it requires to install IAS on Windows AD, as I am not authorized to do.

Then I figureout the netscreen+freeradius+ Windows AD as below.


1. Install Freeradius:

Yum Install Freeradius freeradius-ldap

Need install Epel before this if you haven ' t do:

Yum Install Epel-release

2. config Freeradius:

A. edit/etc/raddb/clients.conf

Add NetScreen as the client of Freeradius:

.....

Client <your_netscreen_IP> {

Secret = <your secretkey>

Nastype = Other

}

......

b . Edit/etc/raddb/modules/LDAP

At the beginning of radius to use LDAP to authenticate a user, it would send a bind firstly with the search account, then I T search the account of the user to is webauthed, and then it bind this Webauth user account. If each step succeeds, radius reply access is accept to NetScreen.

So we had to provide the config file with a search account and some information of the Webauth account such as the base D N.

Define your LDAP server as the Windows AD server as below

Including the LDAP search account (identity+ password) information:

......

LDAP{
#
# Note that this is needs to match the ' name ' in the LDAP
# server certificate, if you ' re usingLdaps.
Server = <your Windows Ad ServerIP>
Identity = "cn=Admin,ou=TEST,DC=TEST,DC=com "
Password = <password of user admin>
BaseDN= "ou=TEST,DC=TEST,DC=com "
Filter = "(cn=%{%{stripped-user-name}:-%{user-name}}) "
#Base_filter= "(objectclass=Radiusprofile)"

.......



C./etc/raddb/sites-available/default

Enable the LDAP authentication in default file by uncomment-the LDAP line in different sections at least-auth section.

D.edit The attribute map File/etc/raddb/ldap.attrmap

Add below line:

Replyitem Ns-user-group memberOf

Or

Replyitem ns-user-group memberOf + =

The difference between the lines is there is operators "+ =" in the second line, which are used when the user belongs to More than one group and you want

All of the group information to being replied to the NetScreen. Normally this operator are used for multi-valued attributes.


3. config NetScreen:

a . Set RADIUS server information

Set Auth-server "My_radius" ID 1
Set Auth-server "My_radius" Server-name <put your free radius IP address here>
Set Auth-server "My_radius" RADIUS port 1812
Set Auth-server "My_radius" radius secret <your radius Secret key>
Set Auth RADIUS Accounting port 1646

b . config Web auth:


Set Webauth server "My_radius"
Set interface "ETHERNET5/3" Webauth
Set interface "ETHERNET5/3" webauth-ip <your netscreen IP used for webauth>
Set Webauth server "My_radius"

C . config user group information, the group name should is the same as user group information defined on Windows AD .

User group information on AD was described in memberOf attribute.

Set user-group "cn=group1,ou=test,dc=test" type auth
Set User-group "Cn=group2,ou=test,dc=test" type auth

d. Define the policy which allows the specific group to access the resource: &N Bsp
set policy ID 1 from ' untrust ' to ' Trust '   ' host1 ' "" Server1 "" any "Permit webauth user-gro Up "Cn=group1,ou=test,dc=test"

This allows user in the group1 to access Server1 from host1 after the user passes the Web authentication at the Web page: Http://<your netscreen IP used for webauth>








This article is from the "11762130" blog, please be sure to keep this source http://11772130.blog.51cto.com/11762130/1792215

NetScreen Webauth with Windows AD Account and group via Freeradius

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.