New Raspberry Pi 3 model B (Raspberry Pi 3) installed

First components to be prepared:

1. Raspberry Pi 3 Model B

2, SD card one sheet

3. Network cable and router

4. Computer

Raspberry Pi Packaging

Raspberry Pi Front

Components

One, SD card system write

First of all, download the Raspberry Pi system from the official website!

Address: https://www.raspberrypi.org/downloads/

Select Raspbian Download

also download Win32diskimager

Write Raspbian system to SD card

Second, installation

1. First connect the Raspberry Pi to the router

Enter the router to find the IP address of the Raspberry Pi

2. Download putty for remote control of Raspberry Pi

Click Open to enter remote control

Default User name Pi

Default Password Raspberry

3. Configuration

After entering SSH

Input sudo raspi-config

Select Expand File ... Make space expansion

Then type sudo reboot, reboot and reconnect

5. Remote Desktop Installation

Input command sudo apt-get install Tightvncserver

After the installation is complete, enter VNCPASSWD to set a password. Enter two times, and then ask if you want to set a view-only password, which is generally not required

Then enter Vncserver to generate the desktop

Then open the PC-side VNC software input Raspberry Pi ip:1

After clicking Connect, enter the VNC password you set into the GUI interface.

OK installation Successful

Note: I encountered some problems in the installation and solutions

1. The system cannot write to SD card

Workaround: The SD card may have write protection or change the drive letter

2, according to the online tutorial can not start the desktop

Solution: Direct Input Vncserver not enter anything else

New Raspberry Pi 3 model B (Raspberry Pi 3) installed