A friend asked me to set it for him the other day. from the next line of the route LAN port, and he needs to use the route to connect three more computers, I used to directly connect the line connected from the first route to the WAN port of the second route, why can't I access the Internet,
My solution:
The first route is connected to the LAN port of the second route. If the IP address of the first route is 192.168.1.1, set the IP address of the second route to 192.168.1.99, then the IP address of the local Nic is 192.168.1.100. It is best to disable the DHCP function of the router so that the network speed can be improved.
Disadvantage: only three computers can be connected
Other methods found from the Internet are attached. For details, refer
The following vrouters are used as vswitches ..
Set the following parameters:
192.168.1.1, go to the vro settings page:
There are three options: 1, pppoe,
2. Dynamic IP Address
3. static IP Address
Select 2 or 3. You can use it after simple settings ..
This gateway cannot be the same as the gateway of your modem...
If they are the same, they will not be able to access the Internet. You can change the gateway in the vro. Let's take a look...
