PE Maintenance System Installation steps

As a maintenance system, we naturally hope that the more powerful the PE function, the better. For those computers that are unable to access the system, we first need to download PE on other normal computers. First download a PE on the internet.

1, prepare a U disk. Copy the required file Edit.com and NIC driver to the flash stub directory. For example, here is the 8169 network card, you can create a new directory named 8169 in Flash memory, the driver files are copied to the directory. The downloaded PE is an ISO image, and after you open the image with UltraISO, copy all the files to the U:pe (U-Finger flash drive letter).

2, in the fault computer using a USB stick boot to DOS, enter the following command, the PE required files to copy to C:.

CD A:pe

Copy *. * C:

When the screen tip system already exists NTLDR, Ntdetect.com, boot. ini file, select No, do not overwrite these three system files.

Note: The "a" in the above command refers to the flash drive letter after booting to DOS, and C: The system disk of the original system. If you are making HDD mode boot flash, the flash drive letter may be C:, when you want to change the system disk character of the original system to D:, if the system disk is NTFS format, you need to use Ntfsdos to copy the file.

3, under DOS continue to enter the following command edit boot. ini, add the PE boot entry:

Attrib–s–h–r C:boot.ini cancels the hidden, system, read-only property of boot. ini

Edit C:boot.ini

After you open the boot. ini, add the "c:avldr.xpe=" Windows PE "" and save it at the end of the text so that you can boot to PE after the computer restarts.