Perfect solution for t4x fan noise problems (hot issues) Latest Version v018 Chinese Version update !!!

Perfect solution for t4x fan noise problems (hot issues) Latest Version v018 Chinese Version update !!!

This is an IBM fan control program developed by foreigners. It perfectly solves the problem of T43 fan revolution and can control the temperature and speed of Fan rotation. I have passed the T43 al9 test.
Open and edit the fancontrol.ini file, change active00001, to, run fancontrol.exe, and select the mode to smart to control the fan rotation speed through the program.
The temperature control value can be changed in the fancontrol. ini file.
In my test results, if the temperature is set to 48 degrees-52 degrees fan rotation speed 1, when the CPU is used to reduce the frequency, the fan rotation speed and noise can basically be ignored. The fan start/stop ratio is about, if you set the fan air volume to 1, the CPU temperature is between 45 and 45 ~ Change between 46 degrees, my machine, the al9 I just bought in Old Wu's two weeks ago. When surfing the Internet and downloading things at night, the fan noise is basically ignored. Now I feel that the Toshiba hard drive is a little noisy, which is much more noisy than my previous 5k100.

Old Wu, if I change my hard drive, will the warranty not be affected?
Now I think it would be nice to minimize the number of things I downloaded last night. According to the above settings, the CPU temperature does not exceed 52 degrees, it should be okay.
Once this program is disabled, the control of the fan is handed over to the BIOS.
In a new version, the author wants to add functions such as minimizing Automatic Running on the tray.
The latest version of v015 is used to minimize the startup and control the temperature based on the maximum temperature of each component. It is not only based on the CPU temperature, but also very good. We recommend that you install it.!
For the latest version v018, some temperature options can be ignored.
Fancontrol. ini settings:
1: active = (0, 1, 2)
Set the status of the fan control program. 0 indicates no control, 1 indicates allow control, and 2 indicates automatic control after startup;
2: Cycle = 5
Set the interval of the temperature to 5 seconds;
3: minimizetow.ray = (0, 1)
Set the state when minimizing, 0 is not changed, 1 is minimized to the system tray;
4: minimizeonclose = (0, 1)
Set the state when you select to close the program. 0 indicates to close, and 1 indicates to minimize to the system tray;
5: startminimized = (0, 1)
Set whether to minimize or hide the program to the system tray at startup. 0 is the minimum, and 1 is the system tray;
6: iconlevels = 50 55 60
Select the temperature represented by the System icon in three colors. The first digit corresponds to the yellow color, the second digit corresponds to the orange color, and the third digit corresponds to the red color;
7: fanbeep = 1 1
Set the start time and stop time of the fan, in ms;
8: maxreaderrors = 10
Set the number of times when the read temperature value is incorrect. The program will be transferred to BIOS control;
9: ignoresensors = PWR, YYY, zzz
Set the program to ignore the Temperature Control item and enter the corresponding name, the program will not consider this temperature value;
10: Level = 48 0
Level = 51 1
Level = 55 4
Level = 60 7
Level = 70 128
Set the temperature value controlled by the program and the fan speed according to the highest temperature of each part of the system;

Technorati label: IBM t4x, Fan