Perfect Tutorial: ADSL common fault solution highlights

Perfect Tutorial: ADSL common fault solution highlights. Everyone is interested in ADSL common fault problems. Before giving you a detailed description of how to solve common ADSL faults, let's first understand the general process and then compare the advantages and disadvantages of the following methods.

Common ADSL faults: non-Internet connection failures

Some common ADSL faults are now using virtual dialing, and some users may accidentally change the user name and password, therefore, if you do not need to access the Internet, you only need to set the correct user and password.

The local connection is disabled. (This problem exists only for 2000/XP users). To solve this problem, right-click the network neighbor attribute and right-click the local connection. for AD cats, there are usually indicators. The indicators can tell where the fault is, the following describes how to identify a fault by using the indicator light.

Power green light indicates that the device is powered on. if the adsl link green light is always on, it indicates that the adsl link is normal. If it is a flash, please connect with your broadband connection. the green light flashing of adsl act indicates that the ADSL link has data traffic. the green light or orange light on the lan link indicates that the LAN connection is normal, and the green light indicates that the data transmission rate is 10 Mbps.

The orange light indicates that the data transmission rate is 100 Mbps. If the light is off, check the NIC, switch, and other devices of the Local Machine (whether the light is connected or damaged .) the green light flashing of lan act indicates that there is data traffic over Ethernet. if the above lights flash abnormally, it turns out that your cat is faulty. Please contact your local broadband network.

The separator method is incorrect. the existing cat has a separator, which can reduce the signal interference on the telephone line. For the separator, there are three interfaces, and the connection of the three interfaces must be correct. these three interfaces are respectively.
◆ LINE port: Connection Phone Jack
◆ PHONE: connect the telephone
◆ MODEM Port: connect to the ADSL Port

When wiring ADSL in common faults, be sure to pay attention. If you want to connect the phone with the phone jack on the wall, be sure to connect the Separator in front of the phone; otherwise, the transmission will lead to loss of voice quality, there will also be a network disconnection.

ADSL common faults: frequent disconnection Problems

◆ The line resistance is too large. For such a problem, the simplest check method is to pick up the phone to check whether there is any noise when the connection is correct. then, we will conduct resistance measurement with the local telecommunications department. to solve this problem, contact the person in your broadband department.

◆ Virus problems. If a virus is detected on the machine, the Network may often fall offline. A solution is provided to completely eliminate the virus.

◆ System problems. Rebuild the system.