1, user settings, FTP settings, IP restrictions, etc. are set under the menu.
2, user settings are also very simple, look at the picture can understand.
3. If you are unable to connect to the FTP server, check the firewall on your server.
If the FTP server component is already installed in wiin2003/2008,
Please uninstall the FTP server component or change the port before running the Phpstudy-brought FTP server.
4. If an error occurs
[Right] Data Socket error: Connection timed out
[Right] List error
[Right] PASV mode failed, try PORT mode.
The passive mode is to send a request from port 21 to the server, and then the server opens the idle port for the connection. And this PASV opens the port because it is not open in the firewall.
For ease of Setup, this port range can be set to the same. Then open the corresponding port in the firewall. Set the FTP client to active mode at the same time.
5. FTP client is set to active mode
http://www.bkjia.com/PHPjc/730234.html www.bkjia.com true http://www.bkjia.com/PHPjc/730234.html techarticle 1, user settings, FTP settings, IP restrictions, etc. are set under the menu. 2, user settings are also very simple, look at the picture can understand. 3. If you cannot connect to the FTP server, check the protection on the server ...