Tianyinxing technology company will launch the latest development board of cortex-a8 series in the National Day -- tq210v6 Embedded Development Board. the core board parameters of tq210v6 have been announced ahead of schedule. Now, we have released comprehensive baseboard parameters and ports to lay a solid foundation for Embedded fans and vendor R & D.
As we all know, the bottom board of the tianembedded Technology Development Board is well known for its stability and compatibility. The new tq210v6 Development Board is also the same. The port is basically similar to the tq210v4 before tq210, and is compatible with most module functions on the market. The bottom board of the tq210v6 Development Board is equipped with USB host, serial port, sdio WiFi, SD card, infrared, temperature sensor, SPI, camera, JTAG, and HDMI interfaces.
Tq210v6 baseboard:
Features:
Floor size |
183*131*20mm (excluding interface exceeding the outer frame) |
Floor Layers |
Layer 2 |
Input voltage |
12 V power input |
Bottom Board power |
0.5 W (12v- 42mA, mean) |
Bottom Board + core board Power Consumption |
2.3 W (12v- 190mA, mean) |
Baseboard + core board + 7-inch screen |
Tn92 5.3 W (12v- 440mA, mean) |
Sleep Power Consumption |
1.7 W (12v- 140mA, mean) |
Maximum input voltage of the IO port |
3.3 V (more than 3.3 v input Io ports are prohibited) |
USB OTG |
One USB _ OTG 2.0 download and debugging Interface |
USB Host |
3-way usb_host 2.0 interface |
Power Amplifier Output |
1 W output power (8 euro load) per left and right channels) |
HDMI |
HDMI v1.3, [email protected] HD Digital Output |
Audio |
Mic, phone, integrated power amplifier interface, onboard electret microphone |
Ethernet |
10/100 m dm9000cep |
COM (232, 485, TTL) |
2-way, 5-line RS232, 4-way TTL (two-way multiplexing), and 1-way RS485 (multiplexing) |
Keypad |
6*6 matrix keyboards |
RTC backup battery |
1 |
SD Block |
1 |
WiFi support |
Sdio WiFi and USB WiFi (optional) |
Beep (buzzer) |
1-way PWM Controlled buzzer |
GPS module |
GPS module supporting serial communication |
3G Module |
Supporting supporting USB-3G modules (optional) |
Minipci-e Module |
Standard minipci-e module mf210 supporting USB communication |
ADC |
One-way potentiometer analog ADC Input |
PWM |
3-way, 1-way use of buzzer, 2-way use of Display |
SPI |
Two SPI interfaces, available acceleration sensor module and ZigBee module (exclusive to Guangzhou tianyao) |
I2C |
3-way I2C |
EEPROM |
Onboard EEPROM chip at24c02 |
JTAG |
10pin (2X5, 2.0 pitch, reserved on the core Board) |
RST Reset |
1 reset button |
Camera |
Two-way, support for CMOS, AV camera (Streaming Media Format) Dual CMOS Camera Module Interface, one-click switch, support for automatic identification (some systems) , (Exclusive to Guangzhou tianembedded) |
AV in |
The AV adapter board can be used to connect to the camera interface. |
User led |
2 |
User buttons |
Eight |
Infrared IrDA |
1 path, supports infrared remote control (available for remote control) (exclusive to Guangzhou tianyao) |
Temperature Sensor |
One Temperature Sensor |
LCD Type Selection |
The baseboard supports switching between capacitive screen and Resistive screen. It can be connected to the VGA module and patch cord on the right side of the LCD interface (exclusive to Guangzhou tianyao) |
Enable dial Selection |
Supports multiple boot modes, such as NAND, emmc, SD, and USB. |
Professional monitoring CORTEX-A8 Development Board -- tq210v6 baseboard port Parameters