The following section summarizes 10 tips for using the PS tool to process blurred photos. The tutorial is more practical, but difficult. I did not give a detailed introduction. I recommend that you refer to it, the author is too strong to learn it together. here is just a few tips. it depends on your own level if you can make a tutorial! · Here is a summary of 10 tips on how to process blurred photos by using PS. let's take a look!
This tutorial is only for expert technical exchanges (the average person seems to be confused)
1. you can copy a layer, change the layer attribute to soft light, and adjust the transparency.
2. you can copy a layer, overlay attributes, and adjust the transparency.
3. copy a layer and remove the color. the ps built-in filter-**-high contrast is retained. [adjust the value], and the layer attribute is superimposed.
4. change the image to the cmyk color mode, adjust the color order of different channels, and then convert it to the rgb mode.
5. if you create a black/white image, you can use the black/white gradient ING to increase the transparency.
6. for black and white purposes, you can select the channel-the monochrome clean channel, such as the red channel, select ctrl + a, copy ctrl + c, click back to the rgb channel, and paste the copied channel to the layer. ctrl + v, and then adjust the color level.
7. in the gray area of a local selection area, [many selection methods are used. Generally, you can use a free or straight line set]. after the appearance, copy it to a new layer. [the appearance is larger, and copy it to a new layer. method: ctrl + j], and then adjust the color order of the curve. if there is a big difference with the surrounding area, use a layer mask or reduce the transparency.
8. if the photo is light and overexposed, you can copy one or more layers. the attributes of the layers are stacked on the front and post-merge.
9. if the photo is very dark, you can copy one or more layers, and adjust the transparency to filter the layers.
10. copy a clean channel, adjust the color level, then illuminate the edge, and black the areas that do not need to be clear. click the channel [ctrl + click the channel to copy] and return to the layer, art effect filter-painting smear.
The above is a summary of the 10 skills used by psto process blurred photos. do you understand this?