"vlan-gives MAC address Authentication"

Build the following routing and switching topology diagram according to the project requirements:

1: Use PC1 ping pc2 to enable the switch to capture 4 PCs and MAC addresses

See what MAC addresses the switch learns

2: Configure the interface between the switch and PC, the MAC address of the root PC is added to the respective VLAN, followed by the Hybird authentication

Note: In the case where the VLAN is configured to give MAC address authentication, the MAC address of the PC is declared and the VLAN is bound both in the interface view and the system view

[]mac-vlan mac-address mac_name VLAN vlan_num1 VLAN _num2

[]vlan vlan_num: Creating VLANs

[Vlan_num]q

[]int interface_name

[Interface_name] Port Link-type hybird: Define the interface as Hybird authentication

[Interface_name]port hybird VLAN vlan_num_1 vlan_num_2 untaager: Add VLAN 1 and VLAN 2 to Hybird authentication does not label

[Interface_name]mac-vlan enable: Enable VLAN on the interface to give MAC address authentication Service function

3: Configure the interface between switch and switch, with trunk authentication, run default label and not default label pass with not pass

[]int interface_name

[Interface_name] Port Link-type Trunk

[Interface_name]port trunk Permit VLAN VLAN_NUM1 vlan_num2

"vlan-gives MAC address Authentication"