"GK101 arbitrary wave generator" upgrade firmware release (version: 1.0.2build955)

First, the firmware description:

Hardware version: 0,LOGIC.3

Firmware version: 1.0.2.build955

Date Compiled: 2015-12-14

======================================

Second, firmware version description:

1, add matching host computer software function, using USB HID protocol.

======================================

Third, firmware download:

Http://pan.baidu.com/s/1ntVQUjn

======================================

Iv. Instructions for use:

When you run the program, the program enters the interface. In this process, there are two ways to connect the host computer to the lower machine.

The first interface is shown in 2 (a): If the GK101 device is connected to the USB, the connection will go directly to this interface.

The second interface is shown in 2 (b): If the GK101 device connected to the USB connection fails to enter this interface, you need to manually click the Connect button to achieve the connection, if it fails, there is a "connect Failed" prompt.

Interface operation after successful connection:

1. Main Menu

Language: Realize the switch between Chinese and English interface.

About: Pop-up interface Form2, read the display GK101 device information.

2. Parameter setting area

Wave: Select the standard waveform you want.

FREQ: The frequency value of the waveform is changed by the up and down buttons, and the step is 0.001 Hz.

AMPL: Change the amplitude of the waveform by the up and down buttons, and step into 0.001 Vpp.

OFFS: The DC offset value of the waveform is changed by the up and down buttons, and the step is 0.001MVDC.

DUTY: Change the duty ratio of the Fampopo by the up and down buttons, the step is 1.

SYMM: Through the upper and lower buttons to change the symmetry of the triangular waveform, the step is 1.

The above figures can be set by manual direct input, the specific operation of Freq as an example: clear the current display data, manually enter 300, and then enter (enter), set the success.

Instrument Status Interface:

Clicking on about will read the instrument status as shown in:

Instrument Direct Address:

http://item.taobao.com/item.htm?id=40313916417

"GK101 arbitrary wave generator" upgrade firmware release (version: 1.0.2build955)