[Reprint] Windows system error code Daquan

Source: Internet
Author: User
Tags old windows rewind

0 0x00000000 finished.

1 0x00000001 incorrect function.

2 0x00000002 the system cannot find the specified file.

3 0x00000003 the system cannot find the specified path.

4 0x00000004 the system cannot open the file.

5 0x00000005 Access denied.

6 0x00000006 Invalid code.

00000007 x the bucket control block has been destroyed.

8 0x00000008 insufficient storage space, unable to process this command.

The block address of the 9 0x00000009 bucket control is invalid.

The 10 0x0000000a environment is incorrect.

11 0x0000000b tries to load a program with an incorrect format.

12 0x0000000c access code error.

13 0x0000000d error.

14 0x0000000e the storage space is insufficient.

15 0x0000000f the system cannot find the specified disk drive.

The directory cannot be removed from 16 0x00000010.

The directory cannot be removed from 16 0x00000010.

17 0x00000011 the system cannot move the file to another disk drive.

18 0x00000012 does not have any files.

19 0x00000013 storage media is in write protection status.

The specified device cannot be found for the 20 0x00000014 system.

The 21 0x00000015 unit is not ready yet.

22 0x00000016 devices cannot identify commands.

23 0x00000017 data error (cyclic redundancy check)

A 24 0x00000018 program sends out a wrong length command.

25 0x00000019 the disk drive cannot find a fixed sector or track on the disk.

26 0x0000001a the specified disk or disk cannot be accessed.

27 0x0000001b the required sector cannot be found for the disk drive.

The 28 0x0000001c printer has no paper.

29 0x0000001d the system cannot write data to the specified disk drive.

30 0x0000001e the system cannot read the specified device.

31 0x0000001f a device connected to the system does not work.

32 0x00000020 the process cannot access the file because it is being used by another process.

A part of the 33 0x00000021 file is locked and cannot be accessed now.

34 0x00000022 the disk drive is incorrect. Please insert % 2 (volume serial number: % 3) into host machine % 1.

36 0x00000024 there are too many shared files.

38 0x00000026 reaches the end of the file.

39 0x00000027 the disk is full.

50 0x00000032 does not support this network requirement.

51 0x00000033 remote computers are not available.

52 0x00000034 duplicate network names.

53 0x00000035 the network path cannot be found.

54 0x00000036 Network busy.

55 0x00000037 the specified network resource or device is no longer available.

56 0x00000038 the network BIOS command limit has been reached. 57 0x00000039 network adapter problem.

58 0x0000003a the specified server cannot execute the required job.

59 0x0000003b an unexpected network error occurs.

60 0x0000003c remote adapter is incompatible.

61 0x0000003d printer queue is full.

62 0x0000003e server space cannot store files waiting for printing.

63 0x0000003f the file awaiting printing has been deleted.

The network name specified by 64 0x00000040 cannot be used.

65 0x00000041 Access denied.

65 0x00000041 Access denied.

66 0x00000042 incorrect network resource type.

67 0x00000043 the network name cannot be found.

68 0x00000044 exceeds the name limit of the regional computer network adapter.

69 0x00000045 exceeds the limits of the network BIOS job phase.

70 0x00000046 the remote server has been suspended or is starting.

71 0x00000047 unable to connect to this remote computer because the number of connections has reached the upper limit.

The printer or disk device specified by 72 0x00000048 has been suspended.

80 0x00000050 files already exist.

82 0x00000052 cannot create directories or files.

83 0x00000053 int 24 failed

84 0x00000054 unable to use the storage body that handles this requirement.

The 85 0x00000055 near-end device name is already in use.

86 0x00000056 the specified network password is incorrect.

87 0x00000057 parameter error.

88 0x00000058 Network Data writing error.

89 0x00000059 at this time, the system cannot execute other itineraries.

100 0x00000064 cannot create another system semaphore. 101 0x00000065 is a dedicated semaphore for other itineraries.

102 0x00000066 semaphore has been set and cannot be disabled.

103 0x00000067 cannot specify semaphore.

104 0x00000068 cannot require a dedicated semaphore during the interrupt time.

104 0x00000068 cannot require a dedicated semaphore during the interrupt time.

105 0x00000069 the previous ownership of this semaphore has ended.

106 0x0000006a insert % 1 to the disk.

107 0x0000006b the program has stopped because the substitute disk has not been inserted.

108 0x0000006c disk in use or locked.

109 0x0000006d pipe has been suspended.

110 0x0000006e the system cannot enable the specified device or file.

111 0x0000006f is too long.

112 0x00000070 insufficient disk space.

113 0x00000071 no internal file identifier is available.

114 0x00000072 the destination internal file identifier is incorrect.

117 0x00000075 The IOCTL call performed by the application is incorrect.

118 0x00000076 incorrect write verification parameter value.

119 0x00000077 the system does not support the required commands.

120 0x00000078 this function is only valid in Win32 mode.

121 0x00000079 semaphore exceeds the timeout period.

122 0x0000007a the data area sent to the system call is too small.

123 0x0000007b file name, directory name, or storage volume label syntax error.

The 124 0x0000007c System Call level is incorrect.

125 0x0000007d the volume label is not set for the disk.

126 0x0000007e the specified module cannot be found.

127 0x0000007f the specified program cannot be found.

128 0x00000080 no sub-itinerary available for waiting.

128 0x00000080 no sub-itinerary available for waiting.

The 129 0 x 00000081% 1 application cannot be executed in Win32 mode.

130 0x00000082 attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.

131 0x00000083 try to move the file pointer to the beginning of the file.

132 0x00000084 cannot set the file pointer on the specified device or file.

The 133 0x00000085 join or SUBST command cannot be used to contain a previously combined disk drive.

134 0x00000086 try to use the join or SUBST command on a combined disk drive.

135 0x00000087 try to use the join or SUBST command in the replaced disk drive.

136 0x00000088 the system tries to delete the link of a disk drive that has not been linked.

137 0x00000089 the system tries to delete the replacement relationship of the disk drive that has not been replaced.

138 0x0000008a the system tries to combine the disk drive into the directory of the disk drive that has been combined.

139 0x0000008b the system tries to replace the disk drive with the directory of the disk drive that has been replaced.

140 0x0000008c system tries to replace the disk drive with the directory of the disk drive that has been replaced.

141 0x000000 the system tries to convert the disk drive SUBST into a combined disk drive directory.

142 0x0000008e the system cannot execute join or SUBST at the moment.

143 0x0000008f the system cannot combine the disk drive or replace the directory under the same disk drive.

The 144 0x00000090 directory is not a subdirectory of the root directory.

There are still materials in the 145 0x00000091 directory.

The path specified by 146 0x00000092 has been replaced.

147 0x00000093 insufficient resources, unable to process this command.

The path specified by 148 0x00000094 cannot be used at this time.

The path specified by 148 0x00000094 cannot be used at this time.

149 0x00000095 try to combine or replace the disk drive Directory, which is already replaced.

The system tracing information is not specified in the 150 0x00000096 config. SYS file, or the tracing function is canceled.

The number of DosMuxSemWait events specified by 151 0x00000097 is incorrect.

152 0x00000098 DosMuxSemWait is not executed; too many semaphore are set.

The 153 0x00000099 DosMuxSemWait list is incorrect.

154 0x0000009a the length limit of the storage media element you entered.

155 0x0000009b cannot create other execution threads.

156 0x0000009c receives the request rejection signal.

The 157 0x0000009d segment has been discarded and cannot be locked.

158 0x0000009e has been unlocked.

159 0x0000009f the address of the thread identification code is incorrect.

160 0x000000a0 the variable string passed to dosexecpgm is incorrect.

The 161 0x000000a1 path is incorrect.

The 162 0x000000a2 signal is waiting for processing.

164 0x000000a4 the system cannot create a thread.

167 0x000000a7 unable to lock part of the file range.

The 170 0x000000aa resource is in use.

The 173 0x000000ad cancellation range locking requirement is not obvious.

The 174 0x000000ae file system does not support automatic lock type change.

180 0x000000b4 the system finds an incorrect segment number.

182 0x000000b6 failed to run % 1.

182 0x000000b6 failed to run % 1.

183 0x000000b7 the same file already exists and cannot be created.

186 0x000000ba transmission flag error.

The system flag specified by 187 0x000000bb cannot be found.

188 0x000000bc failed to execute % 1.

189 0x000000bd failed to execute % 1.

190 0x000000be cannot be executed % 1.

191 0x000000bf cannot run % 1 in Win32 mode.

192 0x000000c0 failed to run % 1.

193 0x000000c1% 1 is not the correct Win32 application.

194 0x000000c2 failed to execute % 1.

195 0x000000c3 failed to execute % 1.

196 0x000000c4 the operating system cannot execute this application.

The 197 0x000000c5 operating system cannot execute this application currently.

198 0x000000c6 failed to execute % 1.

199 0x000000c7 the operating system cannot execute this application.

200 0x000000c8 the code segment cannot be greater than or equal to 64kb.

201 0x000000c9 failed to execute % 1.

202 0x000000ca failed to execute % 1.

203 0x000000cb system cannot find the input environment option. // R

205 0x000000cd is in the sub-directory of the instruction, and there is no signal sub-processing program for any itinerary.

The 206 0x000000ce file name or extension name is too long.

207 0x000000cf ring 2 is in use.

207 0x000000cf ring 2 is in use.

208 0x000000d0 input common file name * or? Incorrect, or too many generic file names are specified.

The signal sent by 209 0x000000d1 is incorrect.

210 0x000000d2 cannot set the signal processing program.

The 212 0x000000d4 segment is locked and cannot be reconfigured.

214 0x000000d6 there are too many dynamic connection modules attached to this program or dynamic connection module.

215 0x000000d7 can/'t nest callto loadmodule.

230 0x000000e6 the pipe state is invalid.

231 0x000000e7 all pipe instances are busy.

232 0x000000e8 the pipe is being closed.

233 0x000000e9 no process is on the other end of the pipe.

234 0x000000ea has more available information.

240 0x000000f0 job phase canceled.

The extended attribute name specified by 254 0x000000fe is invalid.

255 0x000000ff extended attributes are inconsistent.

259 0x00000103 no available materials.

266 0x0000010a cannot use the copy API.

267 0x0000010b directory name error.

275 0x00000113 extended attributes are not applicable to the buffer zone.

276 0x00000114 the extended attribute file on the external file system has been damaged.

277 0x00000115 the extended Attribute Table file is full.

The code for the extended attribute specified by 278 0x00000116 is invalid.

The code for the extended attribute specified by 278 0x00000116 is invalid.

The file system plug-in 282 0x0000011a does not support extended attributes.

288 0x00000120 intends to release mutex that does not belong to the caller.

298 0x0000012a semaphore is transferred too many times.

299 0x0000012b only meets the requirements of Read/writeprocessmemory.

317 0x0000013d the system cannot find the message in the message file % 2 numbered 0 x 0000% 1.

487 0x000001e7 tries to access an Invalid Address.

534 0x00000216 the computation result exceeds 32 bits.

The other end of the 535 0x00000217 channel has a trip at the transfer information.

536 0x00000218 wait for the trip to open the other end of the channel.

994 0x000003e2 access extended attributes are rejected.

995 0x000003e3 the I/O job is terminated abnormally due to the execution end or application requirements.

996 0x000003e4 overlapping I/O events are not set to notification Status.

997 0x000003e5 is processing overlapping I/O jobs.

998 0x000003e6 indicates invalid access to the memory location.

999 0x000003e7 An error occurred while executing the inpage job.

1001 0x000003e9 recursion is too deep, and the stack is full.

The 1002 0x000003ea window cannot be used to send messages.

1003 0x000003eb cannot complete this function.

1004 0x000003ec flag is invalid.

1005 0x000003ed storage media does not contain any identifiable file system. Confirm to load the required system driver, and the stored media is not damaged.

1006 0x000003ee: the external media that stores the file sends a warning, indicating that the enabled file is invalid.

1007 0x000003ef requires that the job cannot be executed in full screen mode.

1008 0x000003f0 an attempt was made to reference a token that does not exist.

1009 0x000003f1 Configuration System Login database damage.

The 1010 0x000003f2 Configuration System logon code is invalid.

1011 0x000003f3 unable to enable the logon code of the Configuration System.

1012 0x000003f4 cannot read the logon code of the Configuration System.

1013 0x000003f5 cannot be written into the logon code of the Configuration System.

A file in the 1014 0x000003f6 system logon database must be restored using a record or other backup. Restored successfully.

1015 0x000003f7 system logon damaged. If a file is damaged, or the file system's memory is damaged, the file cannot be recovered.

The error 1016 0x000003f8 occurs when the I/O job starting from system logon fails to be restored. System logon cannot read, write, or update data. One of the files contains the system logon content in the memory.

1017 0x000003f9 the system tries to load the file to the system and log on to or restore the file to the system logon. However, the format of the specified file is not the format of the system logon file.

1018 0x000003fa tries to perform an illegal operation on the system login code marked as deleted.

1018 0x000003fa tries to perform an illegal operation on the system login code marked as deleted.

1019 0x000003fb system cannot configure the space required for system logon records.

1020 0x000003fc cannot establish a symbolic link on a system login code with a sub-code or a numeric value.

1021 0x000003fd the temporary server code cannot be created.

The notification for 1022 0x000003fe change request is completed, but the information is not sent back through the caller's buffer zone. The caller now needs to list his/her own files to find out where the change was made.

1051 0x0000041b stop a service that has been transferred to the region of other services.

1052 0x0000041c required control is invalid for this service

1053 0x0000041d the service did not respond to the start or control request in a timely fashion. 1054 0x0000041e cannot create Service Execution threads.

1055 0x0000041f Service database is locked.

1056 0x00000420 this type of service is already being executed.

1057 0x00000421 the account name is incorrect or does not exist.

1058 0x00000422 the specified service is suspended and cannot be activated.

1059 0x00000423 specify the Circular Service subordination.

1060 0x00000424 the specified service is not installed.

1061 0x00000425 this service item cannot receive control messages at this time.

1062 0x00000426 service not activated.

1063 0x00000427 cannot be connected to the Service Control Program.

1064 0x00000428 when handling control requirements, an unexpected situation occurs.

The database specified by 1065 0x00000429 does not exist.

The database specified by 1065 0x00000429 does not exist.

1066 0x0000042a service Returns Error Codes for specific services.

1067 0x0000042b the process terminated unexpectedly.

1068 0x0000042c dependent services or groups cannot be activated.

1069 0x0000042d the service is not activated because the logon fails.

1070 0x0000042e after activation, the service is activated.

1071 0x0000042f the specified service database lock is invalid.

1072 0x00000430 the specified service has been marked as deleted.

1073 0x00000431 the specified service already exists.

1074 0x00000432 the system is currently successfully performing the preceding configuration.

1075 0x00000433 the subordinate service does not exist or is marked as deleted.

1076 0x00000434 the current activation has accepted the control setting for the previous successful execution.

1077 0x00000435 after the last activation, the service is not activated again.

The name specified by 1078 0x00000436 is already used for the service name or service display name.

1100 0x0000044c has reached the end of the tape.

1101 0x0000044d to the file ID.

1102 0x0000044e the start or partition of the tape.

1103 0x0000044f to the end of the archive group.

1104 0x00000450 tape without any material.

1105 0x00000451 tape cannot be split.

1106 0x00000452 when accessing a new tape with multiple volumes, the current block size is incorrect.

1107 0x00000453 when loading a tape, the tape partition information cannot be found.

1108 0x00000454 unable to lock the stored media rewind function.

1108 0x00000454 unable to lock the stored media rewind function.

1109 0x00000455 the storage media cannot be unbound.

The storage media in the 1110 0x00000456 disk drive has changed.

1111 0x00000457 has reset the I/O bus.

1112 0x00000458 the disk drive does not have any storage media.

1113 0x00000459 destination multi-byte code page with no UNICODE character.

1114 0x0000045a dynamic link library (DLL) Start routine failed.

The 1115 0x0000045b system is shutting down.

1116 0x0000045c cannot stop the system shutdown because no shutdown is ongoing.

1117 0x0000045d unable to perform the requirement due to an I/O device error.

The starting failure of the 1118 0x0000045e sequence device will cancel loading the sequence driver.

The device cannot be enabled for 1119 0x0000045f. This device shares the interrupt request (IRQ) with other devices ). At least one other device that uses the same IRQ has been enabled.

1120 00x00000460 a serial I/O operation was completed by another
Write to the serial port. (The ioctl_serial_xoff_counter reached zero .)

1121 0x00000461 the sequence I/O job is completed because the time of the sequence has passed. (Ioctl_serial_xoff_counter is not zero .)

1122 0x00000462 no ID address can be found on the disk.

The 1123 0x00000463 disk sector Id field does not match the disk control card tracing address.

The 1124 0x00000464 float disk drive control card returns an unrecognized error from a float disk drive driver.

1125 0x00000465 the disk drive control card returns results inconsistent with those in the cache.

1126 0x00000466 failed to access the hard disk, and the task cannot be operated after retry.

1127 0x00000467 failed to access the hard disk, and the task cannot be operated after retry.

1128 0x00000468 when accessing the hard disk, you must reset the disk control card, but the operation fails.

1129 0x00000469 to the end of the tape.

1130 0x0000046a unable to process this command because the storage space of the available server is insufficient.

1131 0x0000046b discover potential deadlock conditions.

The basic address or file displacement specified by 1132 0x0000046c is not properly aligned.

1140 0x00000474 tries to change the system power status, but other applications or drivers refuse.

1141 0x00000475 the system BIOS cannot change the system power status.

1150 0x0000047e the specified program requires a new Windows version.

The program specified by 1151 0x0000047f is not a Windows or MS-DOS program.

1152 0x00000480 the specified program has been activated and cannot be activated again.

1153 0x00000481 the specified program is written for the old Windows version.

1154 0x00000482 damage one of the linked library files required to execute this application.

1155 0x00000483 no application is associated with the specified file of the job.

1156 0x00000484 An error occurred while sending commands to the application.

1157 0x00000485 cannot find the link library file required to execute this application.

The device name specified by 1200 0x000004b0 is invalid.

Although the 1201 0x000004b1 device is not online, it is a memory online device.

1202 0x000004b2 try to remember the device.

The network path provided by 1203 0x000004b3 cannot find any network provider.

The network path provided by 1203 0x000004b3 cannot find any network provider.

1204 0x000004b4 the specified network provider name is incorrect.

1205 0x000004b5 cannot enable the online network configuration file.

1206 0x000004b6 the online network setting file is broken.

1207 0x000004b7 cannot list non-containers.

1208 0x000004b8 an extended error occurs.

1209 The group name specified by 0x000004b9 is incorrect.

1210 0x000004ba the specified computer name is incorrect.

1211 0x000004bb: the specified event name is incorrect.

1212 the network name specified by 0x000004bc is incorrect.

The service name specified by 1213 0x000004bd is incorrect.

1214 0x000004be: the specified network name is incorrect.

1215 0x000004bf: the specified resource sharing name is incorrect.

1216 0x000004c0 the specified password is incorrect.

The message name specified by 1217 0x000004c1 is incorrect.

1218 0x000004c2 specified Message destination error.

The conditions provided by 1219 0x000004c3 conflict with the existing condition group.

1220 0x000004c4 tries to connect to the network server, but there are already too many connections with the server.

1221 0x000004c5 other network computers are already using this group or domain name.

The 1222 0x000004c6 network is not displayed or activated.

The 1223 0x000004c7 user has canceled the job.

1224 0x000004c8: the job cannot be executed in the file of the user's corresponding section.

1225 0x000004c9 remote system rejects network connection.

1225 0x000004c9 remote system rejects network connection.

1226 0x000004ca disable network connection.

1227 0x000004cb the network transmission endpoint has a connection address.

The 1228 0x000004cc address does not have any related network endpoint.

1229 0x000004cd.

1230 0x000004ce is used to execute an invalid job online.

1231 0x000004cf cannot be transmitted to the remote network.

1232 0x000004d0 cannot be connected to the remote system.

The 1233 0x000004d1 remote system does not support the transmission communication protocol.

1234 0x000004d2 the destination network endpoint of the remote system does not have any services in execution.

1235 0x000004d3 is required to be suspended.

The 1236 0x000004d4 inbound system has interrupted network connection.

1237 0x000004d5 failed to complete the job. Please try again.

1238 0x000004d6 cannot be connected to the server because the account has reached the maximum number of concurrent connections.

1239 0x000004d7 try to log on to the network at an unauthorized time of this account.

The account 1240 0x000004d8 cannot log on to the network from this location.

1241 0x000004d9 network address cannot be used for this required job.

1242 0x000004da service has been registered.

The service specified by 1243 0x000004db does not exist.

The 1244 0x000004dc job cannot be executed because the user is not authorized to use it.

1245 0x000004dd: the job cannot be executed because the user has not logged on to the network. The specified service does not exist.

1246 0x000004de sends a message requesting the caller to continue working.

1247 0x000004df after the start job is completed, try to execute the start job again.

1248 0x000004e0 no other near-end device.

1300 0x00000514 does not specify all reference permissions for callers.

1301 0x00000515 there are still unexecuted connections between the account name and the security identification code.

1302 0x00000516 this account does not set a special system quota limit.

1303 0x00000517 no available encryptor code. Returns a known encryptor code.

The 1304 0x00000518 nt password is too complex to be converted to the LAN Manager password. The returned LAN Manager password is an empty string.

1305 0x00000519 the correction level is unknown.

1306 0x0000051a indicates that the two Revision Classes are incompatible.

1307 0x0000051b this security identifier cannot be specified as the owner of this object.

1308 0x0000051c this security identifier cannot be specified as the primary object group.

1309 0x0000051d an attempt has been made to operate on
Impersonation token by a thread that is not currently impersonating
Client.

1310 0x0000051e the group cannot be closed.

1311 0x0000051f currently does not have any server to log on to, so the login requirements cannot be handled.

1312 0x00000520 the specified logon job stage does not exist. The job stage may have ended.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.