Resolution of wireless network mutual access faults

The development of wireless network technology is growing, and the problem of wireless signal in network use has always been a problem of network signal. Here we will give you a detailed answer.

As wireless Internet technology continues to mature and wireless network equipment prices continue to decline, wireless LAN "figure" is unconsciously appearing in our work and life. Compared with common LAN mutual access operations, wireless mutual access is more prone to some inexplicable fault interference. In the face of these faults, many people often feel unable to cope with them. In view of this, this article will now contribute to the frequent occurrence of wireless mutual access failures and solutions, so that you can enjoy the smooth sailing of wireless mutual access operations in the future!

Wireless Network mutual access fault 1. Access is unavailable at intervals

To avoid this problem, we first need to log on to the background configuration interface of the wireless router, and find the connection method setting options in it, set the option value to "automatic connection, automatic connection after startup and disconnection", save the configuration parameters, and restart the wireless router device, I believe that wireless LAN will not frequently disconnect.

In this case, open the network connection List window of the local workstation, right-click the wireless network connection icon, and click the "properties" command from the shortcut menu, open the Property setting window for wireless network connection. Select the "TCP/IP" setting option in the setting window, and on the corresponding option property interface, try to manually Replace the IP address of the wireless network card. If the IP address is updated for the wireless network card, the local workstation may still be disconnected frequently, then we only need to use professional anti-attack software to protect the inter-access operation of the wireless LAN.

Failover of wireless networks II. slow server access

The access speed reduction Fault Caused by the busy server of the Organization is usually not solved by ordinary users. What we can do is to avoid server access peak hours as much as possible, at the same time, the best way is to ask the network administrator of the organization to try to improve the running performance of the server and ensure that the server can respond to user access requests in a timely manner.

Frequent access speed drop failures caused by placement of wireless routers are also common and often ignored by common users. When the placement of the wireless router is not timely, the wireless signal that the wireless workstation can receive is relatively weak. Therefore, when it transmits files through the wireless network, the speed will naturally be slow.

Wireless Network mutual access fault 3. Access to the Internet via LAN

First, check whether the workstation of employee Xiao Meng is physically connected. When performing this check, open the IE browser window of the local workstation and enter the background management address of the wireless router in the address bar of the window, click the Enter key to open the background logon interface. Then, enter the Administrator account and password correctly to go to the background management interface of the wireless router. In this interface, Ping the DNS server address of the local ISP, if the Ping test is normal, it means that the connection between the wireless router and the Internet is smooth. Otherwise, we need to check whether the connection parameters of the wireless router are correctly configured.

Next, find a common workstation in the wireless LAN, and switch the interface of the workstation system to the MS-DOS window, and then execute the string command "Ping aaa. aaa. aaa. aaa "(aaa. aaa. aaa. the aaa address is the internal interface address of the wireless router, that is, the gateway address of the local network). If the command can be executed successfully, it indicates that the line connection in the local LAN is normal. Otherwise, we need to check the correctness of the wireless router configuration and workstation configuration, and check whether the lines between them are smooth.