Router tplink882 set up dynamic IP do not go online how to do

router tplink882 to set up dynamic IP can not be used to access the solution:

Computer needs to be set up to automatically obtain IP address, if the computer is already automatically obtain IP address, if the parameters are not correct, please put the computer corresponding to the local connection or wireless connection disabled after the Enable.

Note: If the router DHCP server is turned off, you need to manually configure the IP address on your computer, please fill in the correct gateway (the router's management IP), the DNS server address (see the DNS address in the >>wan state of the Routing management Interface).

Login Router Management interface, in the running state >>wan port State, check the WNA port of the Internet mode is dynamic IP. If this is not normal, follow the Setup Wizard to set up your router's dynamic IP Internet access. The following figure:

The parental control of the router, the Internet control (some routers are set up for the firewall) can restrict the Internet access to the intranet, please set the function according to the actual requirements, and do not enable the function if necessary. Set the method as follows:

1. Turn off Parental controls

Login to the Router management interface, click on the Parental Control Settings page, choose not to enable and click Save. As shown in the following illustration:

2, off the Internet control

In the security Settings >> access control, confirm that the Internet control is not checked, click Save. As shown in the following illustration:

To do this, try opening the Web page test online.

Connect the computer that was previously connected to the broadband connection to the router's LAN port (this must be via a wired connection) and log on to the router's admin interface.

Select network parameters >>mac address clone, click Clone MAC address. When the MAC address is the same as the MAC address of the current management PC, click Save and restart the router. As shown in the following illustration:

Try to surf the internet after the reboot is complete.

Note: If you are using the Mini router, please record the MAC address of the computer connected to the Internet, and then fill in the MAC address above (without clicking the clone MAC address), save and restart.

Check your browser settings and check the following methods.

Disable dial-up connection: Open IE browser, click Tool >>internet option, select connection >> never dial connection.

Disable Network agent: Click Tool >>internet option, select Connection >> LAN settings, make sure three options are not checked, click OK, go back to the previous Internet Options dialog box, and click OK. As shown in the following illustration:

Set up, try to open the browser to the Internet.

Replace the browser (using Firefox/firefox, Google/chrome, or other browsers) to try again, if still not online, try to change the computer to do a comparative test.

In the use environment, the front-end modem has multiple interfaces, make sure that the network cable currently connected to the router WAN is plugged directly into the computer to automatically obtain an IP address and normally surf the internet.