Server Load balancer

 

Http://www.cnblogs.com/kaixun001/archive/2011/10/27/2226589.html

 

Environment:

Two computers, the operating system is Windows Server 2003, with a single Nic. Two computers are connected by routers, and the routers are connected to the cat's dial-up Internet. Route address: 192.168.0.1. Set port 80 on the vro to map to 192.168.0.10.

Computer a manually sets IP address 192.168.0.100, and computer B manually sets IP address 192.168.0.101

Create a test website on each computer. The IP address of the website is bound to 192.168.0.10 (same as the cluster IP address configured later)

On computer A, the website has an index.html with content of 192.168.0.100.

On pc B, an index.html with content 192.168.0.101 is placed on the website.

Step 1: first set computer

 

Return to the local connection page after confirmation

 

Wait for system processing after confirmation. The network connection is automatically disconnected once. Automatically connect again. Computer A has been set.

 

Computer B is set in the same way. Only replace 192.168.0.100 with 192.168.0.101.

If the aggregation is successful, the settings are now complete.

How to determine whether the task is successful. After setting the preceding content, open the management tool-network load balancing.

Right-click the network load balancing cluster-connect to the existing

Enter 192.168.0.100 in the host and click Connect.

 

 

 

If the above interface is displayed, the connection is successful ~ If computer B cannot be connected or accessed on computer A, or you need to enter the user name and password. Set Local Security Policy for computer B> Local Security Policy> Security Options

 

 

Okay. Now let's look at the effect:

 

The request has been allocated to two servers.

 

 

Http://www.cnblogs.com/kaixun001/archive/2011/10/27/2226589.html

 

Environment:

Two computers, the operating system is Windows Server 2003, with a single Nic. Two computers are connected by routers, and the routers are connected to the cat's dial-up Internet. Route address: 192.168.0.1. Set port 80 on the vro to map to 192.168.0.10.

Computer a manually sets IP address 192.168.0.100, and computer B manually sets IP address 192.168.0.101

Create a test website on each computer. The IP address of the website is bound to 192.168.0.10 (same as the cluster IP address configured later)

On computer A, the website has an index.html with content of 192.168.0.100.

On pc B, an index.html with content 192.168.0.101 is placed on the website.

Step 1: first set computer

 

Return to the local connection page after confirmation

 

Wait for system processing after confirmation. The network connection is automatically disconnected once. Automatically connect again. Computer A has been set.

 

Computer B is set in the same way. Only replace 192.168.0.100 with 192.168.0.101.

If the aggregation is successful, the settings are now complete.

How to determine whether the task is successful. After setting the preceding content, open the management tool-network load balancing.

Right-click the network load balancing cluster-connect to the existing

Enter 192.168.0.100 in the host and click Connect.

 

 

 

If the above interface is displayed, the connection is successful ~ If computer B cannot be connected or accessed on computer A, or you need to enter the user name and password. Set Local Security Policy for computer B> Local Security Policy> Security Options

 

 

Okay. Now let's look at the effect:

 

The request has been allocated to two servers.