Some of the computer's BIOS boot settings are a bit special, you can see primary boot Sequence, Automatic boot Sequence, Error boot Sequence Three kinds of startup items:
Phoenix BIOS Boot Sequence Setup problem description Phoenix BIOS Boot Sequence setting method solution the boot order for the Phoenix BIOS is:
Primary boot Sequence (sometimes shown as manufacturing), Error boot Sequence, Automatic boot Sequence. You can set 1, 2, 3, 4 ... in each project. Multiple boot devices no post error when walking primary boot order with post error go to error boot order from network (LAN) wake up automatic boot order when you experience startup problems, such as setting up a boot from a network card or installing multiple drives to boot from a specific hard disk , set the 3 boot order to be the same, in order to confirm that the set start order works. The top of the settings screen shows which boot sequence is currently set, and the right side prompts you to toggle between the different boot sequence settings by 1, 2, and 3.
Note: If a boot device is set to exclude, it is not possible to press F12 at boot time to select this device. If you install multiple drives and do not want to boot from a hard disk, you can put hard drives that you do not want to start in the exclusion list, in addition to adjusting the boot order.
Note: For dual hard drives, the boot order is adjusted primarily for cases where the hard disk does not have a non-Windows standard partition. Because most applications of Lenovo require that the hard disk must be a first boot hard drive, there may be a problem with the hard disk having an HPA partition, a type12 partition, or other non-Windows-standard partitions. If you do not want the hard drive to start with this special partition and app, it may cause the boot order of the settings to not be saved. The Lenovo HDD Protection app does not support dual hard drives. It also does not support the use of hard drive protection applications with dual drives.
=====================================================================
Lenovo Brand Machine appears to stop at F1, F2 prompt screen, turn off all the startup floppy drive items, OK.
The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion;
products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the
content of the page makes you feel confusing, please write us an email, we will handle the problem
within 5 days after receiving your email.
If you find any instances of plagiarism from the community, please send an email to:
info-contact@alibabacloud.com
and provide relevant evidence. A staff member will contact you within 5 working days.
