Set the data layer scale In ArcMap

1. Settings Data Layer scale
1.1 set the absolute display scale of the Data Layer
Based on the data corresponding to the data layer File Of Coordinates System And coordinate Unit, set the absolute maximum to minimum display ratio. In the Open Location
The following figure shows the SoutheastAsia. mxd window content table:
(1) Right-click seasia-City Data Layer
(2) Open the shortcut menu of the Data Layer
(3) Click properties to open the layerproperties dialog box.
(4) Click the General tab to enter the general topic.
(5) Select the Don 'tshowlayerwhenzoomed radio button.
(5) enter the minimum display Scale (minimumscale) in the outbeyond window)
(6) enter the maximum scale (maximumscale) in the inbeyond window)
(7) Click the OK button (execute the display ratio setting to close the layerproperties dialog box)
1.2 set the relative display scale of the Data Layer
Open Map The following table shows the content of the SoutheastAsia. mxd window:
(1) Right-click seasia-City Data Layer
(2) Open the shortcut menu for data layer operations
(3) Click visiblescalerange.
(4) The visiblescalerange menu is displayed.
(5) Click the setminimumscale command (set the minimum display scale chart of the city data layer to 2.15)
(6) Click the setmaximumscale command (set the maximum display scale chart of the city data layer to 2.15)
1.3 Delete data layer display scale settings
Open the map document SoutheastAsia. mxd's window content table:
(1) Right-click seasia-City Data Layer
(2) Open the shortcut menu for data layer operations
(3) Click visiblescalerange.
(4) The visiblescalerange menu is displayed.
(5) Click the clearscalerange command (delete scale setting 2.15)