Set the WIN10 Pro version by pressing F8 to enter the Win7 Safe Mode technique

WIN10 system security mode can not be used, how to do? It is not easy to get into safe mode when you are in win8/win8.1 and after the Win10. Previous systems such as Win7 and XP can select the menu by pressing F8 at boot time to enter Safe mode. This can be a big help for the sudden discovery that the system is not able to enter the situation properly. In fact, in the WINDOWS10, can also go through this old way into the safe mode, but the first set to go a little bit "detours."

The specific method is as follows:1, the use of WIN10 mirror flash drive or CD-ROM recording as a WIN10 boot U disk or CD, 2, the use of the above-mentioned production of Macao Sands to start the computer to the interface-

3, do not click on any function of the interface, directly press SHIFT+F10 to open the command prompt, 4, execute the following command (note the blank): bcdedit/set {default} Bootmenupolicy legacy

5, restart the computer can be in the boot screen (Microsoft Blue logo) before pressing F8 into the Safe Mode options menu Although this way a little trouble, but finally can be an emergency. And if your computer does not turn on the "Quick Start", then this setting "once and for all", in the future, you want to boot into Safe mode can be directly press F8, and do not have to enter the system and then set. If you want to revert to the default state, you can restore it by running the following command from the command prompt in Administrator mode: bcdedit/set {default} Bootmenupolicy standard then turn on Quick Launch again.

Set the WIN10 Pro version by pressing F8 to enter the Win7 Safe Mode technique