Setting up wireless router to improve security configuration

Sometimes you will always encounter a network of other people on the event, so how do we solve such a thing? Here's how you deal with the problem. Replacing desktops with books is an indisputable fact. One of the most important features of the notebook is the ability to support Wi-Fi internet access, regardless of the high-end Centrino 2 or low-end netbooks are 100% of the built-in wireless network card. At the same time, wireless routers are no longer noble, cheap only need more than 100 dollars, can be said that the threshold of wireless internet has been greatly reduced. Wireless internet is the biggest advantage is not the shackles of network cable, no matter where you are at home, you can directly use wireless signal online, as fast as wired. This is also the main reason for the popularity of wireless internet.

第1-2 minutes: Connect the notebook to the wireless router with a network cable, and log on to the wireless router

Step

Connect the LAN port of the notebook and wireless router with a network cable, which is not a wireless alternative to the wired network. Because some wireless routers do not allow the wireless connection router to be configured by default, you need to manually open the line.

Step

to open IE browser, enter 192.168.1.1 In the Address bar, and enter the default username and password. At present, most of the wireless router's initial IP address is 192.168.1.1, of course, may also be 192.168.0.1; The default username and password are often admin, admin,root, root two pairs. The specific or please look at the instructions, this kind of content specification generally speak more clearly.

under Vista system, set IP address to Start menu → control Panel → network and internet→ view network status and tasks → manage network connection → Local connection → Right click "Properties" →internet Protocol version 4 (TCP/IP V4) → properties → selection " Use the IP address below to enter IP address 192.168.1.2, subnet mask 255.255.255.0, default gateway 192.168.1.1, enter the IP of the local DNS server in the lower DNS server, or use the 192.168.1.1 address.

第3-5 minutes: Set the wireless connection portion of the router, the security settings are important

This step is to complete the wireless router in the security, connection settings, is the top priority. This step of the different routers may not be the same, but the approximate principle is similar.

Step

enters the network settings in the basic settings, which have wireless network settings. There are a few points to note:

where you can set an SSID is the name of the access point, you can set, but it is best not to useSpecial characters, please use 26 letters and numbers. It is recommended that you hide the SSID, which is to prohibit "SSID broadcasts." Www.3lian.com

To set the wireless mode, you can limit the support of 802.11G or 802.11b or mix, generally choose the default value is "mixed" can be. The

section of Third-party firmware or settings-rich routers can set wireless mode to AP or Network Bridge, which is set to the wireless access point AP. The

Channel is set to a conflict-less band, which can generally be maintained by default and set separately if a conflict affects the Internet. The wireless settings for the

models are located on a stand-alone Wireless network tab, and some models set wireless related options in the Advanced settings. But the contents of the set are very similar.

Step

To set security options. The security option is very important, the light lets the other people rub the net to affect the network speed, heavy then other people can invade your computer through the wireless network, so want to do what can do. So safety must be done well.

1, the main point of this step is to choose the correct safe mode, it is recommended to use WPA Personal, that is, "WPA personal", encryption Select "AES", and then enter a long enough complex password, such as "D#$#*&ui (* ( Ujjiuiyiyyeyhy*&* "This has no rules, the integration of numbers, special characters, letters of the password is difficult to crack."

2, if the Internet client is more fixed, that is, a few fixed laptops use this wireless LAN, you can also limit the MAC address to get better security. Restricting MAC addresses can be set in wireless filtering, where specific MAC addresses are added and set to allow only these MAC addresses to access the wireless network.