Seven Windows system failure resolution

1. "Blue Screen" error
Q: The system is in the process of using a blue screen and displaying some error messages is commonplace. Although the error message may include "Press any key to continue", "Press CTRL 10
Alt+del reboot, but all unsaved information will be lost "such descriptive text, but usually not as it is said to be able to continue or reboot, many times the system will panic, at this time in addition to press the reset button has little choice. Why does the blue screen appear frequently?
A: There may be many reasons why there are blue screen errors in Windows, such as running more than one large program at the same time, and less system memory, when the system may be prompted "windows
Is
Busy "(System busy) bad blue screen information, this is due to insufficient memory. In addition to running some defective programs, there may be blue screen information about a "fatal exception" error in Windows, and it will also indicate that a certain file has an error at an address. Of course, there are many reasons for hardware, such as incompatible hardware or damage caused by operational errors, overclocking, system overheating, etc. will also lead to blue screen errors. There is also a small error will make Windows blue screen, that is, when the system from the floppy disk, the CD-ROM data to take away the floppy disk or the optical drive door open.
2. "Illegal operation" hint
Q: When I run the application, "illegal operation" Tip often head face, such as being Mollie strolled blithely playing games, surfing the internet, and even with the sound will be edited electronic image album, a "XX program executed illegal operation, is about to close the screen, so that a few hours of painstaking work, many disappointing, Can you tell me the exact reason?
A: In the computer operation, there is a "illegal operation" of the probability of the hint than the blue screen phenomenon to a chip. The main cause of "illegal operation" is software. A system error can occur when a program accesses memory outside its memory address space. In addition, because Windows cannot reasonably allocate and reclaim memory resources, it causes some software to run without the corresponding memory address. When the "illegal action" prompt appears, press the following
The "Details" button will indicate an error code that you can use with a gadget Ms Windows Eror
Messages (http://soft.winzheng.com/SoftView/SoftView_2660.htm) to see the exact meaning of the illegal operation error code.
3. "General protective Error" notice
Q: I am in the computer operation, sometimes suddenly the system "crashes", the screen prompts "General Protection
Fault ", translation over, the original machine appeared" General protective error ", this is why, how to solve?
A: The appearance of "general protective errors" usually tells you that there is a problem with a software installed or that a driver of a hardware device needs to be updated. If we can't find the reason, we can use the system's own
Dr.Watson Gadget, if an error occurs in a program, it can record the software environment at that time and help you determine the cause of the error. But there's a little trick to try: General program conflict or error, will be prompted, regardless of software or hardware reasons, will refer to the error file, please use the search function to find this file, view properties can know its description, then the crux of the problem found, reload or upgrade the file problem will be solved.
4. "Invalid page error" notification
Q: Sometimes when I'm working on a computer, a "Lnvalid Page" pops up.
Fault (Invalid page error) "Hint, make me confused, do not know the wrong, excuse me how this is caused?
A: This error message usually occurs when the data is passed between the application and the Windows system, which, when an error occurs, can cause the program to run a wrong command, and the end result is seen
"Lnvalid Page
Fault (Invalid page fault) ". This error occurs mainly for the hardware to check, such as too little physical memory causes virtual memory to run unstable, the remaining hard disk space is too small, virtual memory is corrupted or damaged by an application, a program tries to use physical memory inappropriately, an application tries to access data that is being modified by another application, and so on. If for the first two reasons, it is recommended that you increase the memory and hard drive, or clean the hard drive, restore enough space. If it's something else, that's not a big problem, think about whether you've recently installed new software or changed your hardware configuration to find clues.
5. "Explorer performs illegal operation" warning
Q: The recent computer in the open close the window of the operation, often appear "explorer executed illegal operation" tips, how is it, how to solve?
A: This is due to the instability of the system caused by a lot of specific reasons, there are hardware, it may be software. You should first check if the system is infected with the virus, then you can reinstall the new version of IE to try, if there is a problem, it is necessary to consider the hardware problem, the most likely cause the system is unstable accessories mainly memory, power supply, motherboard, etc., you can use the replacement method to find the root cause of the problem.
6. "Rundll32 Error" display
Q: In Windows operation, I often encountered the system prompts "Rundll32 error", if you press the "OK" button in the pop-up dialog box, the system will forcibly close the program you are using; If you do not press the OK button, a dialog box with a red fork is crossed. This is why, how to solve?
A: DLL is Microsoft's proposed dynamic link library concept. The principle is that each program needs code can be obtained from the same address, can save the system space. But it's also the biggest weakness of Windows: When an application is installed to make itself run better, the database is upgraded to its own version, which causes other programs to not even start Windows themselves, and the DLL becomes a "trap." The possible reason for the RUNDLL32 error is that the Mmsystem.dll file in the operating system is corrupted or missing and can be overwritten by copying the file on another computer;
The statement about Mmsystem.dll in the System.ini file is missing. The workaround is to select the System.ini tab in the top menu of the System Configuration Utility window, locate the [boot] section, add Drivers=mmsystem.dll, and save the reboot machine.
7. "ActiveX Control unsafe" advice
Q: When I open a file (such as my document), a message appears, "ActiveX controls are unsafe and may not display the page correctly," with two choices identified and discarded. When the selection is determined then enter my document, in the document of Excel in the selection of the above information, the selection can be entered, but no impact on the file. Can you explain why and how to solve the problem?
A: This is because the ActiveX controls and plugins in your IE security settings are disabled, and the file you open contains this control, so you will be prompted. Please execute the tool in IE
-internet option-security-Custom level, set the ActiveX controls and Plug-ins inside to "Enable" or select "Default Level" directly.